How does it go ? Snooze and you lose Updated 3-3-15
- Thread starter Phil S
- Start date
- Status
ccasion1
OP
OP
Re: How does it go ? Snooze and you lose
Thanks, I appreciate the effort. If you can't, no worries.
Thanks, I appreciate the effort. If you can't, no worries.
OP
OP
Re: How does it go ? Snooze and you lose
Just got back from the job site - I had not been there since weds. We had many cabinets down last weekend, but it appears many have walked off - should not have but impossible to secure. I have only two grey laminate cabinets left and about three uppers.
But there are numerous dark wood base cabinets left that are still installed and a complete set of break room cabinets hat are still there as they are still screwed to the walls. Tomorrow I have got to fix my dump truck first and then will head downtown - probably won't get there until 10. Thinking here - probably best if I try to get everything down and secured - and then give them away the next weekend.
Just got back from the job site - I had not been there since weds. We had many cabinets down last weekend, but it appears many have walked off - should not have but impossible to secure. I have only two grey laminate cabinets left and about three uppers.
But there are numerous dark wood base cabinets left that are still installed and a complete set of break room cabinets hat are still there as they are still screwed to the walls. Tomorrow I have got to fix my dump truck first and then will head downtown - probably won't get there until 10. Thinking here - probably best if I try to get everything down and secured - and then give them away the next weekend.
Re: How does it go ? Snooze and you lose
Phil, I'm open to whatever works best for YOU. I could probably swing by at 10 tomorrow, but would be pressed for time since my wife had to go out of town for the weekend on short notice. I can also most likely make next weekend work as well since she'll hopefully be home. That is assuming that the work surfaces I was interested in are even still left. If not it's no big deal, I've been putting off that project due to being short on time that a little more waiting won't hurt! :gar-Bi
Thanks again for offering up the stuff to begin with. :icon_thum
B
Phil, I'm open to whatever works best for YOU. I could probably swing by at 10 tomorrow, but would be pressed for time since my wife had to go out of town for the weekend on short notice. I can also most likely make next weekend work as well since she'll hopefully be home. That is assuming that the work surfaces I was interested in are even still left. If not it's no big deal, I've been putting off that project due to being short on time that a little more waiting won't hurt! :gar-Bi
Thanks again for offering up the stuff to begin with. :icon_thum
B
OP
OP
Re: How does it go ? Snooze and you lose
Finally getting all this sorted out. The job scope has expanded (they always do) and more millwork is available. I will get all of this ready to give away over the next week and make everything available on Saturday march 14.
I have six members still waiting for some freebees, but I will not be able to fill every want list as many of the base cabs were a destroyed during the deconstruction phase
On reserve are:
farmerbw 26 x 106 top and 26 x 70 top
hymie 20 x 94 top
thrt15nc 47 x 30 upper
mkepke 47 x 30 upper 35 x 24d x 35 h six drawer base
scottm three 47x30 uppers
Additionally I have:
1 - 47 x 30 upper
1 - 28 x 30 upper
1 - 53 x 30 upper
1 - 39 x 30 upper
1 - 79 x 30 upper
1 - 44 x 30 dark wood upper
1 - 35 x 24d x 33h base
2 - 11 x 24d x 35h base
2 - 25 x 84 green top
2 - 30 x 46 green top
1 - 30 x 37 black top
1 - 30 x 120 black top
1 - 27 x 124 black top
Let me know what you need and are able to pickup on Saturday morning March 14
Finally getting all this sorted out. The job scope has expanded (they always do) and more millwork is available. I will get all of this ready to give away over the next week and make everything available on Saturday march 14.
I have six members still waiting for some freebees, but I will not be able to fill every want list as many of the base cabs were a destroyed during the deconstruction phase
On reserve are:
farmerbw 26 x 106 top and 26 x 70 top
hymie 20 x 94 top
thrt15nc 47 x 30 upper
mkepke 47 x 30 upper 35 x 24d x 35 h six drawer base
scottm three 47x30 uppers
Additionally I have:
1 - 47 x 30 upper
1 - 28 x 30 upper
1 - 53 x 30 upper
1 - 39 x 30 upper
1 - 79 x 30 upper
1 - 44 x 30 dark wood upper
1 - 35 x 24d x 33h base
2 - 11 x 24d x 35h base
2 - 25 x 84 green top
2 - 30 x 46 green top
1 - 30 x 37 black top
1 - 30 x 120 black top
1 - 27 x 124 black top
Let me know what you need and are able to pickup on Saturday morning March 14
- Status
Premier Sponsors
Contact for your financial processing needs!
Our Sponsors
LATEST FOR SALE LISTINGS
-
For Sale Belt/Disc Sander and Oscillating Spindle Sander- Started by bjessup
- Replies: 0
-
For Sale Powermatic PM 701 Mortiser, 4 Powermatic Chisels (3 unused in wrapper) $600- Started by frankc4113
- Replies: 0
-
-
-
Delta 6" Professional Jointer with Base - BNIB (Johnson City/Bristol, TN)- Started by JSFoster75
- Replies: 0