I was able to follow the directions and get the saw together. However since this is my first "real" table saw I'm not sure how exact I need to get the part in-line. I put a straight edge to the table and it does not look perfect. This could be a result of the straight edge, saw-top or both. The directions also call for the front rail to be exactly 2 and 27/32 below the top. I can get it there and crank down the screws but it seams to move out off of that measurement.
Is there anyone out there willing to give a hand and make sure I have this thing setup perfect? well at least setup in good working order.
I live in the Rolesville/Wake Forest area.
Is there anyone out there willing to give a hand and make sure I have this thing setup perfect? well at least setup in good working order.
I live in the Rolesville/Wake Forest area.