As I am getting ready to frame the floor system for my new shop, I am thinking about running vent lines before I install the subfloor. I am planning on blowing air into the room pushing the vapors out the vent. That way the flammable vapors will not be pulled through a vent fan possibly causing a fire.
My questions are how much cfm do I need for an 8x8x8 room and how big of a vent pipe do I need.
Also since I think the vapors are heavier than air, I am guessing that I should blow the incoming air in at ceiling height and the outgoing vent should be at floor level.
Please correct me if I have that backwards
Thanks and stay safe during this storm
My questions are how much cfm do I need for an 8x8x8 room and how big of a vent pipe do I need.
Also since I think the vapors are heavier than air, I am guessing that I should blow the incoming air in at ceiling height and the outgoing vent should be at floor level.
Please correct me if I have that backwards
Thanks and stay safe during this storm