A couple nativty sets

[ScottM]

Here are better views of a couple nativity I made. Design by Steve Good.

View image in gallery​

View image in gallery​

 

[b4man]

Really fine work! Is the 2nd pic intarsia?

 

[ScottM]

Barbara the second one is just cut out of 3/4 poplar at a 4 degree angel so when assembled the parts project out about 1/4". I just stained the pieces before assembly. They are held in place with a dab of hot glue. They only tricky part is the star. To cut the star not only do you need to cut at 4 degrees but your started hole must be drilled at 4 degrees too.

 

[Sealeveler]

Some right smart good looking cutting.
Tony

 

[LeftyTom]

Most excellent craftmanship.

 

[dupont6480]

Beautiful work!

 

[Canuck]

Very nice work Scott!!!!:icon_thum:icon_thum:icon_thum

Love seeing the 3D effect. Add's plenty of depth.

They will be selling great in the next few weeks.

Wayne

 

[Charlie]

Very nice!

 

[RandyJ]

Nice job, Scott! You have been busy since I last saw you.
Is the backing in the first pic that piece of walnut from Fred?

Keep up the great work.

 

[cskipper]

Cool!!!! I think the shepherd's hook is very difficult too. Were you able to keep the cut-outs from the "waste" of either? It would be great if you could somehow wound up with 4 for the effort. Great work as always!! :eusa_clap:eusa_clap:eusa_clap

 

[cheryllewis]

Here are better views of a couple nativity I made. Design by Steve Good.

View image in gallery​

View image in gallery​

Y'all better enter the contest!

Cheryl

 

[CaptnA]

Great work Scott.
The second is similar to a piece I've had a lot of requests for. It is thick, and the pieces slide so you can highlight them or just a slight shadow line.

 

[Joe Scharle]

Very nice, Scott :eusa_danc