wood

  1. Walnut Bases with Mounts

    Walnut Bases with Mounts

  2. Walnut Dowl Base

    Walnut Dowl Base

  3. Two Level Dowl Base

    Two Level Dowl Base

    Africa is carved out of bottom level; where Wart Hog was taken.
  4. Walnut Dowl Base

    Walnut Dowl Base

    Individual dowl rods made (1/2 moon).
  5. Zebra Walnut Base Finished

    Zebra Walnut Base Finished

  6. Zebra Walnut Base

    Zebra Walnut Base

    The black area will be skinned with zebra hide.
  7. Walnut Bases Finished

    Walnut Bases Finished

  8. Walnut Bases in Progress

    Walnut Bases in Progress

  9. Walnut Bases w/ Removable panel

    Walnut Bases w/ Removable panel

    Again, removable panel to be skinned and then inserted back in. All tops are removable, so that the taxidermy can be attached, then earth work on top of plywood.
  10. Walnut 16-Panel Base

    Walnut 16-Panel Base

    The opening is for a removable panel to be covered with zebra, then reinstalled.
  11. Cedar Octagon Pedestal Base w/ Deer

    Cedar Octagon Pedestal Base w/ Deer

  12. Walnut Octagon Pedestal Base w/ 2-Deer

    Walnut Octagon Pedestal Base w/ 2-Deer

  13. Walnut Octagon Pedestal Base w/ Elan

    Walnut Octagon Pedestal Base w/ Elan

  14. W

    Building a butcher block.....can't find wood.

    Greetings all, First time poster here. I ran across this site as I began to really dig into the beginnings of wood working. I've always loved the look and feel of butcher block pieces so I thought I would make my own and see where it went. The problem is, so far I have not been able to find...
  15. Dogwood Mallet

    Dogwood Mallet

    The dark stains in this dogwood mallet are caused by the anthracnose fungus that is ravaging the Southern dogwood population
  16. Dogwood Mallet

    Dogwood Mallet

    The dark stains in this dogwood mallet are caused by the anthracnose fungus that is ravaging the Southern dogwood population
  17. TulipSlab

    TulipSlab

    A chunk of tulip (aka yellow poplar) from my backyard. In addition to the usual mineral streaks that are common in tulip, this tree was hit by lightning, stood dead for 1.5 years, and sat on the ground for another 6 months before I cut out this part.
  18. Timmy

    Shave Horse is done

    Made a shave horse today. I bought a draw knife, so I figured I had to have it. Can't wait to put it to work. http://www.youtube.com/watch?v=Uh_h_G2tQjk&feature=g-all-c
  19. Bodie - 04-2010

    Bodie - 04-2010

    This is a burning my better half did for her sister, of course his name is Bodie.
  20. The Rose

    The Rose

    Here is a piece that my better half burned, my part of the project was to build the frame, and keyhole the back… It is Basswood and walnut.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top