storage
-
Sanding Cabinet
Drawers for sheet goods- Bill Clemmons
- Media item
- sanders sanding shop storage
- Comments: 0
- Album: Sandiing Cabinet
-
Sanding Cabinet
Completed, installed cabinet- Bill Clemmons
- Media item
- sanders sanding shop storage
- Comments: 0
- Album: Sandiing Cabinet
-
Three-cornered box
Box inspired by a triangular box I saw in Chester County, Pa. museum. The original had a solid top with applied molding to form a lip. The cross grain had taken its toll over the years so I decided to make a raised panel top and bottom to allow movement.- Charlie Buchanan
- Media item
- box dovetailed paneled storage triangular
- Comments: 0
- Category: Smaller Woodworking Projects
-
Three-cornered box
Box inspired by a triangular box I saw in Chester County, Pa. museum. The original had a solid top with applied molding to form a lip. The cross grain had taken its toll over the years so I decided to make a raised panel top and bottom to allow movement.- Charlie Buchanan
- Media item
- box dovetailed paneled storage triangular
- Comments: 0
- Category: Smaller Woodworking Projects
-
D
Need of lumber storage rack (mobile)
I was lucky to be around Saturday when a local cabinet shop was closing down and planning for a big equipment sale. Besides some great deals on some needed equipment; he gave me access (free) to a lot of cabinet grade plywood, oak molding, and some nice rough oak planks. Once I got them in my...- dupont6480
- Thread
- lumber mobile rack storage
- Replies: 5
- Forum: Workshop Discussion
-
Flute Blank Storage
I have acquired 40 blanks I will eventually make flutes out of. They are approximately 1 1/2" square by 30" long. The moisture % when I use my cheap moisture meter from Lowes says they vary from 9% to 14%. I have then in my unheated shop now in rows of 6 with 3/4" "stickers " between...- Flute Maker
- Thread
- blank flute storage
- Replies: 0
- Forum: "How To" Forum
-
M
Barbie House Storage Dresser - Completed
I was going to update my WIP post, but found that it was closed. No prob'. I just opened a new one. Just a reminder, this was a small set of drawers to go under my daughters' 3-story Barbie house. I designed in: Two drawers for all the Barbies and accessories A pull out shelf stained...- MarvinWatkins
- Thread
- completed dresser house storage
- Replies: 9
- Forum: General Woodworking
-
M
Barbie House Storage Dresser - WIP
I started a thread in the finishing forum about 'Stain Options on Hickory (Pecan)', http://www.ncwoodworker.net/forums/showthread.php?t=41004. But at this point, I thought I would continue over here as a Work-In-Progress thread. My daughters have a Barbie house with loads of pieces and parts...- MarvinWatkins
- Thread
- dresser house storage wip
- Replies: 6
- Forum: General Woodworking
-
storage problem solved
I got these pic in my email this am and thought id share seems like a good Ideal to me. d- Mark Stewart
- Thread
- problem solved storage
- Replies: 3
- Forum: General Woodworking
-
S
PE request: Johnson City, TN (short-term storage)
.- Sully
- Thread
- city johnson request shortterm storage
- Replies: 2
- Forum: NC WW Pony Express Requests
-
WorkbenchViews
add pass through draws- minddust
- Media item
- augers for rt side storage
- Comments: 0
- Album: Workbench
-
Wood Storage
I received some of exotic wood Ive ordered today. It was paela and granedillo... It was blanks for flutemaking 1 1/2" square by 24 " long...It was coated on the ends and some of the them were almost coated completely....Now we all know how hot it is in NC now but I wouldn't think these...- Flute Maker
- Thread
- storage wood
- Replies: 3
- Forum: Wood
-
Deck Storage Trunk/ Box
Deck Storage Trunk/ Box- moodyfloyd
- Media item
- box deck storage trunk/
- Comments: 0
- Category: Member Galleries
-
handsaw storage
I am looking for an aesthetically pleasing way to store some handsaws (mostly backsaws). Please show me what you have built so I can get some ideas... Thanks- kooshball
- Thread
- handsaw storage
- Replies: 3
- Forum: Hand Tools and their Use
-
-
-
-
-
Outfeed, Storage, WorkBench~!
Hello NCWW's, I have been meaning to build me an outfeed/work bench for a while now and after looking through Charlie's photo's I decided to make a similar version, so here it is~! And I am loving it~! All the Walnut on top was in the Dumbster at a local cabinet shop that makes...- MrAudio815
- Thread
- outfeed storage workbench
- Replies: 5
- Forum: Workshop Discussion
