materials

  1. D

    Where can I find...

    I have a small order for some turned lighthouse desk displays for the ASEM Engineering Management Honor Society. These display will be provided to each student section of the society. What I need is some elegant, artsy way of depicting the lighthouse's light section itself. I've been...
  2. D

    To spray, or not to spray...that is the question. (one of many!)

    Again...we delve into finishing. I hate to beat several dead horses about this...but the choices of finish and the application methods available, provide roughly 128,000 (through repeatable permutations) options for finishing...and I am very confused, especially when it comes to spraying. I...
    • Deeptree
    • Thread
    • materials question spray spraythat
    • Replies: 24
    • Forum: Finishing
  3. AmishWarlord

    Box construction materials

    When building an item like a gun case is it accessible to use materials like MDF or plywood for the inset that will be covered by velvet or for quality should this also be made of hard wood? On one hand I can see that it's glued in, cover over, never to be seen. On the other hand if you...
  4. William Roscoe

    Solid Surface Countertops Materials

    I've been trying to find a place that will sell this to a non-certified contractor and in the cental part of the state. I was thinking there were some generic products that were sold to the public.:dontknow::icon_scra
  5. MrAudio815

    What could You Build with these Materials #2

    Hey Everyone, So what could YOU Build with these Materials?:widea: Trying to clean up the shop again. I have some used 3/4" plywood that was used to support a floor. It did have that green sticky glue on one side, but its hard now. I used some of it for a work bench and it worked...
  6. Bigdog72

    Drawer Materials

    I have been using 1/2" ply from the BORGS for drawer boxes (with good success) as I build my shop furniture. Over the last couple of shop days I have been preparing drawer box parts for storage cabinets for LOML's craft room. Everything was fine until I started dovetailing the fronts. The law of...
  7. MrAudio815

    What could you build with these materials?

    Hey everyone just trying to pay it forward, I hope! :dontknow: In effort to provide myself with more elbow room for DaveO's Lathe I need to clean up shop and was just wondering what you would build with these materials. I'm planning on giving most of it away. It's 1/4 plywood with 1x4's...
    • MrAudio815
    • Thread
    • build materials
    • Replies: 18
    • Forum: Wood
  8. L

    Outside cabinet materials suggestions

    I am about to secure my first commission for a set out outside kitchen cabinets, countertops included. I am seeking thoughts and opinions on types of materials to use for this project. These cabinets are for a corner of a boat dock. I know how to make them, just unsure as to the materials. I...
    • lwhughes149
    • Thread
    • cabinet materials suggestions
    • Replies: 29
    • Forum: Wood
  9. W

    Misc. Finishing Materials FREE yes FREE

    Anyone planing that big project or duplicate projects I have lots of stains and glazes in quantities from pints to gallons that are FREE for the taking. Need to clean house so these are needing to go to anyone that could use them. If interested contact me at 336-782-6201 located in western davie...
  10. L

    Refinishing Materials

    I have a friend (my boss actually) who wants to strip and refinish some antique furniture that, unfortunately, has some pretty serious scratches on it. I was under the impression that these scratches could be filled with dyed or tinted shellac sticks that were melted into the scratch and that a...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top