finished

  1. Finished In Place

    Finished In Place

  2. Finished In Place

    Finished In Place

  3. Finished In Place

    Finished In Place

  4. leaf_down_corner_detail

    leaf_down_corner_detail

    Another detail of the rule joint shape blending with the edge molding. Leaf is down.
  5. leaf_down

    leaf_down

    The dropleaf side of the table showing the rule joint open and the triangular leaf. This fits nicely into a corner for storage.
  6. front_corner

    front_corner

    This is the "front" corner of the dropleaf table opposite the triangular leaf. This corner is a right angle and the others are 45\'s.
  7. from_the_front_2

    from_the_front_2

    Dropleaf card table finished with water soluble dye in a diluted antique red walnut. Then amber shellac, rubbed out and waxed
  8. corner_top_up

    corner_top_up

    This shows how the rule joint blends with the edge profile of the table top in this project. The leaf is up in this photo.
  9. corner_open

    corner_open

    This shows how the rule joint blends with the edge profile of the table top in this project. The leaf if down in this photo.
  10. Finished Drawer Front

    Finished Drawer Front

    The main body is Soft Maple, the trim and knob are Walnut.
  11. Finished Drawer Front

    Finished Drawer Front

    The main body is Soft Maple, the trim and knob are Walnut.
  12. Mike Davis

    Finished a bowl and made two spoons (PICS)

    Maybe I'll have time to take some pics tomorrow. :rotflm:
  13. buildintechie

    Finished Coffee Table...5 years in the making.

    I finally finished my coffee table today. I started building it over 5 years ago...and stole the concept from an Ikea coffee table. It took me so long, because once I built the panels and the tops I didn't want to continue because I was afraid I would mess it up. Well, the past 6 months I've...
  14. P

    Finished Home Office Cabinet...Finally

    Well it took nearly three years through a terrible economy and not enough time to work on this but I delivered this project to a very patient client. The original concept rendering View image in gallery The finished piece View image in gallery View image in gallery
  15. drw

    Floor Clock: Finished!

    I am very pleased to report that my latest project, a Grandmother Clock, is finished in time for Christmas. The project turned out to be a lot of fun to build. There was more milling work and miters than most of my recent work, but it was fun. That said, I do not recall too many "Norm Moments"...
  16. eyekode

    Cole Jaws for Dirty Santa - now with finished pictures

    It is that time of year again. Time for Dirty Santa with my extended family :). For the last couple years I have been bringing something I made. This year I want to finish up a platter: (Please excuse the incorrect white balance on this one) This is a fun piece of hickory that Joe Bradshaw...
  17. mark2

    Finished Christmas gift - cherry and sapele box

    Completed box for some of my daughters christmas more special tree ornaments. Box sides and panel on the top are Sapele, base and frame on lid are cherry. Colors turned out very similar though I only used clear satin Arm r seal for finish. Contrast in grain is more of what I was after. Also...
  18. MikeH

    Finished a couple bottle stoppers...

    I just finished a couple wine bottle stoppers. Let me know what you think.
  19. merrill77

    Finished coffee table

    I finally finished my first version of this coffee table. These pictures aren't great - I need to take some time to get some better ones, but it might be a while since I get that done. The design of this table (not mine) uses an interesting combination of joinery that, if done right, should...
  20. Girls' Barbie Dresser - Finihsed

    Girls' Barbie Dresser - Finihsed

    Birch Ply & Solids, Pine Secondary with Pecan Drawer Fronts and Trim, 5 Coats Orange Dewaxed Shellace and Paste Wax My own design... First try on drawers... used wood runners.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top