extension

  1. Ralrick

    Powermatic Tablesaw - adding an extension

    I just bought a powermatic 64 tablesaw with the 30" Biesemeyer fence. I need to add an extension to complete the right side of the table between the rails. I can order one from powermatic but it is $136 and it just a laminate top. Are there aftermarket extensions that will fit this saw or it...
  2. Douglas Robinson

    Question regarding Making 220 Volt Extension cord

    I want to make a 200 Volt extension cord. I know what connectors I need. It will run from a 20 AMp outlet. What wire should I use? 10/3? 12/3? I know it needs a ground wire. Doug
  3. PM64A Extension Table

    PM64A Extension Table

    Oak framed laminated table extension.
    • KC7CN
    • Media item
    • 64a extension pm64a powermatic table
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  4. zimman20

    <TENTATIVELY GONE> Biesemeyer extension table, 12" x 27"

    Not sure if it's the correct forum or not... Free, come pick it up or pay the shipping from 28164 to wherever you are: Coming off of a C'man Hybrid (22124) I've replaced the extension table on my saw with a wider one that I made. You can have the original 12"x 27" if you want it. Nothing...
  5. Travis Porter

    Tablesaw extension table

    I am going to make a new extension table for my tablesaw. The one I have on it is 15 years old. It is a piece of melamine, isn't quite long enough, and is pretty much worn out. For the new one, I am going to put formica on it, but I plan on going cheap and using what I have. Question is...
  6. NCPete

    30 amp extension cords?

    waiting for permission to wire my garage to power the new equipment may be a while. Can anyone tell me if this cord will work for my new 5 hp planer?? I understand i may have to change the ends, so I may not go for the glowing end type, but it is just about 25 feet from my dryer (in laundry...
  7. SteveColes

    Wooden extension table.

    Ok, now I am installing the wooden extension table on the PM2000. I have nothing to comapre this to in my experience except the woodpecker supplied extension tables I added to my dewalt 746x. The PM table has a dip in the middle of about 1/32", the Woodpecker had no visible dip. I asked Tom...
  8. woodworker2000

    Installing Side Extension Wings on TS

    How do you get these things level with the main table and how much variance is acceptable? I started by inserting the bolts and snugging them up, then tapping the wing with a rubber mallet on the top and bottom until it felt like it was the same level as the table. I checked for variations in...
  9. Ken Massingale

    Woodpecker Table Saw Extension and Ridgid TS

    I have a Woodpecker Quick Lift and TS extension table (27 by 15 1/2) coming, to mount in the empty space between the rails on the right side of my 3650. If anyone has mounted a Woodpecker extension table to Ridgid rails, I would appreciate seeing how you did it. I'd like to have all the needed...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top