extension

  1. R

    Delta lathe LA 200 bed extension

    Hello All; Does anyone know where I might be able to find a bed extension for my Delta Model LA 200 midi - lathe? Thanks in advance; John
  2. Table Saw Extension

    Table Saw Extension

    My low tech way of opening the box. I put a dowel rod in a hole I drilled and push on it from the bottom. It works...
    • lcottrell
    • Media item
    • extension saw table
    • Comments: 0
    • Album: Projects
  3. Table Saw Extension

    Table Saw Extension

    Nice little storage space for my accessories and keeps them close at hand.
    • lcottrell
    • Media item
    • extension saw table
    • Comments: 0
    • Album: Projects
  4. Table Saw Extension

    Table Saw Extension

    I built it as a storage box. I used 2 12" piano hinges and applied laminate to the top.
    • lcottrell
    • Media item
    • extension saw table
    • Comments: 0
    • Album: Projects
  5. Table Saw Extension

    Table Saw Extension

    I finally built a table saw extension.
    • lcottrell
    • Media item
    • extension saw table
    • Comments: 0
    • Album: Projects
  6. Demo of table extensions - mobile base for planer

    Demo of table extensions - mobile base for planer

    This video demonstrates extending the infeed / outfeed tables on the mobile base for my 15" planer
    • merrill77
    • Media item
    • base extension mobile planer table
    • Comments: 0
    • Category: Member Galleries
  7. B

    Forstner bit extension

    Can one be utilized SAFELY as a router bit extension or is it a horrible idea to attempt? I'm leaning towards un-safe but was wondering if anyone had actual experience with this (granted this may be a moot point if the shank doesn't pair with the collet size). THANKS!
  8. Mobile base for 15in planer

    Mobile base for 15in planer

    Mobile base for 15in planer with folding extension tables
    • merrill77
    • Media item
    • base extension mobile planer table
    • Comments: 0
    • Album: Planer Stand
  9. Ken Massingale

    Mini Lathe $200, Extension Bed $1.00

    Rockler Free Shipping
  10. Bas

    Router collet extension

    I'm -very slowly- working on some cutting boards. I want to route some handles into the edges using a box core bit. So I created a jig out of some plywood that allows me to use a guide bushing. Complex stuff, this math thing, figuring out how large to make the opening when the outer diameter of...
  11. merrill77

    Bandsaw extension tables?

    I expect the primary uses for my new bandsaw will be resawing and cross-cutting to length. In either case, it seems like it would be handy to have significantly longer tables (front, back and side). Due to my space constraints, they would need to fold down when not in use. I flipped through all...
  12. Alex Franke

    Router table extension for BT3 and $99 Freud router

    Several people have asked me for details about the router table extension that I build for my Ryobi BT3100 to house my new $99 Freud router. :) (I mentioned it in my introduction post here: http://www.ncwoodworker.net/forums/f15/greetings-chapel-hill-19490/) Yes, yes, I know -- stealth gloat...
  13. S

    makeshift table saw extension wing

    Is there any reason I should not use the main table from one table saw as an extension wing on another? I have a line on an old craftsman saw that I could probably get really cheap. I was thinking of using the main table off of it as an add on extension on my Jet contractor saw. I might have...
  14. mkepke

    Where to find 4-wire extension cord ?

    OK, I got my VFD (phase convertor) in the mail, but ran into another problem. I need to wire-up an extension cord from the VFD to the motor and I need 4 wire cord (three hots plus ground) in 14 or 16 gauge. Does anyone know of a local spot (Triangle) to buy 4 wire, 14-16 ga. cords ? They...
  15. johnpipe108

    DP Table Extension Wings

    I finally whipped up some quick wings for my drill press tabletop, just in time for my park bench restoration project: Material is 1/2 inch birch shop-grade ply from Lowes, and the right-hand wing is hinged to keep it out of the way when using the lathe: Threaded inserts are used...
  16. WoodWrangler

    Driveway Extension / Bobcat Work (Charlotte)

    Look for someone with a bobcat (or some type of earth mover) -- or someone who just wants to work ! At the end of our driveway is an area that was covered in gravel for parking & such. It was the wrong kind of gravel and is now just a muddy mess. We'd like to have the area leveled off a bit...
  17. Steve W

    Griz BS Extension Arrived! Question...

    My Griz 6" extension arrived by Brown Truck yesterday, and I'm chomping at the bit to get it installed. I notice in the instructions that they say that the top half of the saw "represents a heavy load" and to get assistance. My question here is, about how much does this part of the saw weigh...
  18. B

    Can I use an extension cord??

    I have a very small one car garage for my shop and unfortunately, I have one plug in the garage. Due to this, I have been using an extension chord when running my heavy tools (table saw, planer, etc) that can't be easily or conveniently relocated over to the plug. The chord appears to be a...
  19. sapwood

    Router Extension Collet

    Good idea or bad? Safe or dangerous? What brand/manufacturer do you like or dislike? Here's the link for CMT and MCLS. TIA, Roger
  20. mburke911

    on CL Jet JML-1014 Mini Lathe plus Lathe Bed Extension - $190

    http://raleigh.craigslist.org/tls/416789253.html Someone jump on this!!! Mark

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top