completion

  1. Barbie House Dresser approaching completion

    Barbie House Dresser approaching completion

    I just cut the top trim pieces and routed the profile. Once I get the pecan gel stain (sample in right drawer opening) on the drawer fronts, slider shelf and top trim, I will be ready for final glue up, sanding and top-coat finishing!
  2. Barbie House Dresser Nearing Completion

    Barbie House Dresser Nearing Completion

    Now it has the drawer, drawer guides and pull out shelf. Set and filled nail heads on face. No it looks like it has the poxs!
  3. KC - 24 Angles and half-laps

    KC - 24 Angles and half-laps

    A parting look at the main posts with half-lapped horizontal 4x4's for the door opening and roof framing. The diagonals were half-lapped onto the roof frame (see KC - 20) and lag screwed into the main posts.
  4. KC - 23 A Close Up

    KC - 23 A Close Up

    Here's a closer look at the doors after installation. I caulked all around the White Oak frame with clear silicone door and window caulk.
  5. KC - 22 Craft Center Kiosk

    KC - 22 Craft Center Kiosk

    Here is the kiosk at the beginning of the trail at the Craft Center building.
  6. woodguy1975

    It's alive, It's alive. :) Woodguy Toolhaul Story Completion

    Well, after a few days acting as an industrial electrician I have all three of my machines up and running. The edge sander is powered and plumbed for DC. The W&H molder is powered with a hookup for DC when in use. The big one was the 3 spindle shaper. Most of you know about this tool...

Premier Sponsor

Our Sponsors

Top