boat
-
Wood options for boat decking
My aluminum boat needs a new floor and I'm mulling my options. Looking for opinions or experience as boat flooring is new to me. Boat is a 14.5' Grumman aluminum fishing boat, so this is a relatively simple project. The original floor was plywood and carpet, rotted away now. Previous owner... -
Cradle Boat
I built this cradle just before my son was born. The transoms, keel and knees are walnut, the planks are pine planed to 1/8-in. thick and ribs are white ash. The davits are maple and Lyptus with a little piece of walnut trim on the top. I turned sheaves for the lines to run over from the cradle...- Dave Richards
- Media item
- Comments: 2
- Category: Furniture
-
-
Free Boat Building Demo @ Asheville Hardware 4/16
Join us Saturday April 16th from 11am - 3pm for a free presentation and discussion about the Stitch and Glue method of boat construction at Asheville Hardware's Woodworking School. Bill Thomas, an experienced instructor at Maine's WoodenBoat School, will be leading the presentation with a...- Asheville Hardware
- Thread
- Replies: 2
- Forum: User Announcements
-
Irish sail boat builder
Earlier this week there was posted a link that showed a sail boat being hand built in Ireland. I watched it and would like to see it again. I need help finding it as I cannot find it myself. Thanks, Dino Drosas- dino drosas
- Thread
- Replies: 0
- Forum: General Woodworking
-
C
Boat Shelves
Some one has asked me If I would make them one of these. It will be about 6ft tall and 24 -30 inches wide. View image in gallery View image in gallery View image in gallery I was wondering what you all thought I should use for the sides. I am thinking 1/4 plywood. Would...- ck1999
- Thread
- Replies: 4
- Forum: General Woodworking
-
price_list
Shown, 1942 17' Chris Craft Special Runabout. Hull 17-215, replacing all the ribs, batons, and side boards. All Honduras Mahogany. Before the wood is added to the boat I soak the wood in CPES. Changes the wood fiber so the little bugs do not eat it. Been working for 2 years off and on...- cc194217
- Media item
- Comments: 0
- Category: North Carolina Woodworker.net
-
port_side_batton_on
Shown, 1942 17' Chris Craft Special Runabout. Hull 17-215, replacing all the ribs, batons, and side boards. All Honduras Mahogany. Before the wood is added to the boat I soak the wood in CPES. Changes the wood fiber so the little bugs do not eat it. Been working for 2 years off and on...- cc194217
- Media item
- Comments: 0
- Category: North Carolina Woodworker.net
-
IMG_7201
Shown, 1942 17' Chris Craft Special Runabout. Hull 17-215, replacing all the ribs, batons, and side boards. All Honduras Mahogany. Before the wood is added to the boat I soak the wood in CPES. Changes the wood fiber so the little bugs do not eat it. Been working for 2 years off and on...- cc194217
- Media item
- Comments: 0
- Category: North Carolina Woodworker.net
-
CC_1942_17_ft_special_runabout
Shown, 1942 17' Chris Craft Special Runabout. Hull 17-215, replacing all the ribs, batons, and side boards. All Honduras Mahogany. Before the wood is added to the boat I soak the wood in CPES. Changes the wood fiber so the little bugs do not eat it. Been working for 2 years off and on...- cc194217
- Media item
- Comments: 1
- Category: North Carolina Woodworker.net
-
Boat building/ Kayak info
Is there anyone that might be able to give me any insight in building a wood strip kayak. Maybe you built one or know someone that has. I'm in the Statesville area and want to get started on one this spring Thanks- Dwight
- Thread
- Replies: 9
- Forum: User Announcements
-
Cape Fear Wooden Boat Show
For anyone looking for a destination this Saturday, the CFCC is having their annual Wooden Boat Festival. The College has a number of boats on display –in water and on-land. The boat building department of the college is open to the public as well. http://cfcc.edu/blogs/news/category/news/events/- striker
- Thread
- Replies: 3
- Forum: User Announcements
-
Free boat! (almost)
Did you ever want to build a boat? I did. But I didn't really set aside the time to finish this project and now I need to clear out the shop. My loss is your gain. I have a partially built (Roar model) 14' row boat with plans that I never finished. It is stitch and glue constructions with...- jtdums
- Thread
- Replies: 1
- Forum: User Announcements
-
Hand made boat
Wooden boat made from Luan strips by friend John- sapwood
- Media item
- Comments: 0
- Album: Stuff
-
Scrollsaw boat in red oak, poplar and BB ply
A small "picture" of a sail boat made by scrollsawing red oak and poplar pieces. The red oak portion of the boat is one continuous piece. The poplar pieces were cut to fit the openings. The background is baltic birch ply and the frame is red oak. Finished with tung oil- Sully
- Media item
- Comments: 0
- Category: Member Galleries
-
New boat
Hey guys, sorry I haven't posted in a while. I had a few projects I've been working on. As of this week I've completed a new ERC Adirondack Chair and a Walnut bookcase from wood I purchased from Kyle. I recieved a new dig camera for Christmas and plan on posting the pics in a week or so. I've...- coastal1
- Thread
- Replies: 5
- Forum: General Woodworking
-
J
Boat building
What the best wood for building a wood plank boat, white oak?- jeff...
- Thread
- Replies: 3
- Forum: Wood
-
A cedar boat I built a few years ago
This was my first attempt at a cedar planked boat. It still needs final sanding. Length is 12ft. beam 4ft. 16" depth. My ex-wife confiscated it so it now resides in GA. I will be building a few more boats as time allows.- coastal1
- Thread
- Replies: 18
- Forum: General Woodworking
-
J
Boat Building
Greetings All, I'm Matt, newbee here. I e-mailed David before posting here to make sure it was ok. I own a small side business called JEM Watercraft http://www.jemwatercraft.com . I design mostly canoes and kayaks for folks who like to build there own boats from plywood, epoxy, and fiberglass...- JEM
- Thread
- Replies: 9
- Forum: Who We Are
-
a few Boston Whaler photos
a work in progress.- Mavawreck07
- Media item
- Comments: 0
- Category: Member Galleries
Our Sponsors
