attachment

  1. charlessenf

    Woodmaster 712 Planer Attachment - $50 Asheville, NC

    "I have an attachment for my Woodmaster 712 Planer (1994) that I believe is a jointer or molder accessory attachment. I have never used it before and it is taking up valuable workshop space, so I would like to sell it. Contact Ben by text at 434-249-0257 if interested and include Woodmaster in...
  2. photo7

    photo7

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 1
    • Album: Router sled 1
  3. photo6

    photo6

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 0
    • Album: Router sled 1
  4. photo5

    photo5

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 1
    • Album: Router sled 1
  5. photo4

    photo4

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 0
    • Album: Router sled 1
  6. photo3

    photo3

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 0
    • Album: Router sled 1
  7. photo2

    photo2

    • harvey314
    • Media item
    • attachment jawhorse rockwell router sled
    • Comments: 1
    • Album: Router sled 1
  8. J

    Dual Purpose Post - WIP and Dust Collector vs Cyclone Attachment

    So, I have two goals with this post. 1. I've been working on a walnut toy box. This is my first project using rough lumber. Pictures below: Rough cut from Saw4you: Squared Stock Dry Fit of the front face - first raised panel project 2. During this project, I managed to create a giant...
  9. Dutchman

    Cross attachment to Metal Stud

    I am working on a cross to hang at our chuch, and am looking for some suggestions for attaching to the metal studs. I have decided to attach it to one stud, so I can machine the back of the cross for a fastner or series of fastners in the back. Below is a picture of the cross, and a small...
  10. manfre

    Delta Mortising attachment - $50 (Bahama)

    Delta Mortising attachment - $50 (Bahama) Date: 2011-03-24, 9:26AM EDT Reply to: sale-eap53-2283414594@craigslist.org [Errors when replying to ads?] Delta Morising attachment for drill press. Used only once, in case with all attachments. $50 (HALF PRICE) Woodcraft has exact same model...
  11. R

    Face frame attachment

    What is the best way to attach a bookcase faceframe to the solid walnut carcase. There will be divided light doors attached so I am not sure glue only is the best way. I have a biscuit cutter but that seems like overkill, any suggestions would be appreciated. Rick
  12. farmerbw

    Single Leg attachment suggestions

    I'm making a couple of fairly simple portable tables from some free plans that I'm going to enlarge and think I need to deviate from their suggested mounting hardware and am not sure what I should use. The top is just a 3/4x11 3/4x19 1/2 ERC plank that will have some holes and slots to hold...
  13. CarvedTones

    Rigid flex vacuum attachment

    I got one of these little jewels from WoodCraft to try to improve how I use my vacuum as a DC. They have a new one that comes with two attachments for only $20. Here it is set up for power carving: Here it is at the lathe: It does not suck in all the chips when turning, but does a...
  14. WoodWrangler

    SMC: Worksharp w/ Wide Blade Attachment $150

    NOT MINE, BUT A GOOD PRICE W/ THE ATTACHMENT http://www.sawmillcreek.org/showthread.php?t=110812 James K Peterson Location: Rincon, GA near Savannah...
  15. K

    Dewalt 734 Planer DC Attachment

    Anyone else have this planer who found a decent dust collector method? The craftsmen planer i bought from splint a few weeks back had a dust collector connector on it, this dewalt one looks like I could buy one that would fit it but i have searched google for a little but without any luck...
  16. PeteM

    Wide Blade Attachment for WS3000

    http://www.worksharptools.com/product.asp?specific=153 pete
  17. W

    mortise drill press attachment

    I have a Jet mini milling machine that is stout as all get out.What I'm wondering is where would I look for a drill press type attachment for mortising that would possibly fit the quill on my milling m/c.I've seen the delta and grizzly,and jet but I'm looking for a company that produces them for...
  18. Joe Scharle

    DW625 dust port attachment

    I just got this and can't figure out to mount the bottom part. Manuals are no help. Any help appreciated. Joe
  19. mburke911

    FS: on CL Foley/Belsaw Planer-Molder w/ Drum sanding attachment

    FS: on CL Foley/Belsaw Planer-Molder w/ Drum sanding attachment 5HP 12 1/2 wide $550 http://charlotte.craigslist.org/tls/446536250.html I did some digging and you can still get parts, blades and molding kinives for this unit. http://www.belsaw.com/ Mark
  20. DavidF

    vacuum attachment for DW618

    I have been using the new DW618 router for a few days and wanted to share initial results. The motor is a tight fit in the plunge base as people have said recently, but not so difficult to take it back for exchange. The tightness does make it a bit of a fiddle to align the motor though. First...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top