Search results

  1. BrianInChatham

    This is Scott Smith's fault

    At least that's what I'm telling my wife when she gets back to town.... I was talking to Scott last week about getting a shaper vs. building a decent router table. What he said made a lot of sense (usually does), this is the result. Seems like whenever my wife goes out of town I spend a lot...
  2. BrianInChatham

    Shopsmith 10ER on Raleigh CL $150 (Apex)

    http://raleigh.craigslist.org/tls/2355476767.html Not mine, won't last long at that price!
  3. BrianInChatham

    Walker Turner TS on Raleigh CL

    This looks like junk to me, but the "old iron" crowd seems to get a bit glassy-eyed when Walker Turner comes up, so maybe someone will want this: http://raleigh.craigslist.org/tls/2327442683.html
  4. BrianInChatham

    A little gloat...

    I don't usually post gloats but thought I'd make an exception today. About a week ago I saw an ad on CL for a saw I thought I might be interested in, so I sent an inquiry. Turns out it belongs to a good friend of mine who unfortunately is closing the doors on a cabinet shop he started with a...
  5. BrianInChatham

    Feed direction relative to drum rotation in drum sander

    I picked up a used Grizzly 24" dual drum sander recently and finally got around to setting it up last night. Once I got the drums dialed in it produces a decent finish, but the stock is coming out with a thick layer of sawdust compressed to the surface. I've noticed when I brush it off that in...
  6. BrianInChatham

    Shopsmith on CL in Rocky Mount

    I don't know diddly about Shopsmith equipment but this looked like a pretty good deal. http://raleigh.craigslist.org/tls/2296304319.html
  7. BrianInChatham

    Fair price on PM 54A 6" jointer?

    I moved on to a larger jointer and now my 54A is gathering dust. I don't often sell used equipment and would like a few opinions about what a fair price to ask might be. Comes with a mobile base and new set of knives. Suggestions?
  8. BrianInChatham

    Rikon 25-200 12" Jointer\Planer

    I'm wondering if anyone has any experience with this jointer? I'm outgrowing my PM 54-A and if I'd really like to jump up to a 12" rather than 8". My shop space is limited though, so the small footprint of the Rikon is attractive, and the in- and outfeed tables appear to come drilled and...
  9. BrianInChatham

    Panel saw question

    I picked up a panel saw last week and am setting it up as we speak. I'd like to place it in a bit more of an upright postion than one usually sees with these, as that would give me a great spot for lumber storage instead of having largely dead space behind it. My concern with this is how to...
  10. BrianInChatham

    Raleigh\Durham\Chapel Hill walnut run

    Thought I would do as MXRacer has and start a seperate thread to coordinate a run for those of us who are interested in some of the bargain walnut in Youngsville. So- what we need to know: 1) who's buying (for certain) and how much 2) how are we going to move this stuff- who wants to...
    • BrianInChatham
    • Thread
    • hill raleighdurhamchapel run walnut
    • Replies: 0
    • Forum: Wood
  11. BrianInChatham

    Boise Crane mortise & tendoning machine - $150 (Raleigh)

    I know some of you guys like old iron, maybe this'll be of interest to someone. Can't say I'm familiar with a "tendoning" machine though. Maybe you stick your hand in it? http://raleigh.craigslist.org/tls/2007242175.html
  12. BrianInChatham

    Wood planes on Raleigh CL

    I don't know a darned thing about old wood planes, but I see the topic come up frequently so thought I'd post it in case it's a good deal. http://raleigh.craigslist.org/tls/1985832584.html
  13. BrianInChatham

    Powermatic 20" bandsaw on CL

    Pretty big, but a decent price for someone needing a saw this size. http://raleigh.craigslist.org/tls/1971300270.html
  14. BrianInChatham

    Powermatic customer service

    Every now and then I come across a negative post about Powermatic since they were acquired by WMH tool group, and just wanted to throw my $.02 in on the subject. I have a PM2800 drill press, certainly a rather spendy indulgence on one of the less complex pieces of equipment we have in our...
  15. BrianInChatham

    Need help with receiving lumber shipment Chapel Hill area

    This isn't really a PE request, but I'm hoping someone can help me. I have a shipment of lumber coming in that will need to be received at a location with a loading dock and the means to unload a large pallet, presumably a forklift. This was going to be delivered to my neighbor's granite shop...
  16. BrianInChatham

    Wow that's a lot of veneer...

    Any one of these lots is more veneer than most of us could use in a lifetime, but maybe someone will be interested anyway. http://www.irsauctions.com/index_lots.asp?pg=details&id=13813
  17. BrianInChatham

    Jet planer, edgesander, dust collector, Delta Unisaw- In Cary

    Prices on these seem reasonable. I have this edgesander and dust collector and have been happy with both. http://raleigh.craigslist.org/tls/1878712601.html
  18. BrianInChatham

    14" Powermatic Table Saw $295

    This is way more saw than most of us will ever need, but can't beat the price even if you have to buy a phase converter. http://raleigh.craigslist.org/tls/1673895205.html
  19. BrianInChatham

    Cheap tools in Cary

    This is probably already gone, but it's a steal for somebody: http://raleigh.craigslist.org/tls/1661181140.html
  20. BrianInChatham

    Portable sawmill in Chapel Hill area?

    Hi folks- I'm relatively new to woodworking (but am ambitious!) and also new to the area. Now that I live somewhere with trees (don't find too many where I lived in Phoenix!) I've been having these great ideas about having some of the oak on my land milled into lumber for all the household...
    • BrianInChatham
    • Thread
    • area chapel hill portable sawmill
    • Replies: 4
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top