This post is a little late, in relation to when I did it, but it's a GLOAT at any measure!
My Grizzly bandsaw underwent a neck-lift with the riser block upgrade ... adding 6" cutting capacity! :eusa_danc
The bad ... when I first installed it, I also put on a new blade. Not being that familiar with bandsaw setup, I turned it on with only a few adjustments and more/less ruined the blade as it got jammed up in the bearings! That's life though ... no hard feelings! :roll:
My Grizzly bandsaw underwent a neck-lift with the riser block upgrade ... adding 6" cutting capacity! :eusa_danc
The bad ... when I first installed it, I also put on a new blade. Not being that familiar with bandsaw setup, I turned it on with only a few adjustments and more/less ruined the blade as it got jammed up in the bearings! That's life though ... no hard feelings! :roll: