I'm going to start a project - the horses head that Steve Good recently published in his newsletter/blog. This will be in 3/4" Quarter-Sawn White Oak - had the perfect sized scrap piece on the workbench.
Question is: What size blade do you recommend for 3/4" QSWO? Seems like my normal #2 or 3 that I use for 1/4" or 1/2" stock are not going to be large enough. This is not an intricate piece. A lot of open space - it is more an outline in wood.
TIA - Ken
Question is: What size blade do you recommend for 3/4" QSWO? Seems like my normal #2 or 3 that I use for 1/4" or 1/2" stock are not going to be large enough. This is not an intricate piece. A lot of open space - it is more an outline in wood.
TIA - Ken