In talking with my electrical contractor today, we're going to do some trenching to get power out to a couple of HVAC units, and isolation transformer and power to a small electronics shop.
He suggested that while we're trenching, that we go ahead and trench all the way to the new woodshop.
My question is this... about how much power (phase, amperage and #circuits) would make sense to put in a 12x16 shop?
Thanx!
Max
He suggested that while we're trenching, that we go ahead and trench all the way to the new woodshop.
My question is this... about how much power (phase, amperage and #circuits) would make sense to put in a 12x16 shop?
Thanx!
Max