So....after letting my polyacrylic cure for about 10 days I decided to start rubbing out my finish today. I used cushioned sanding discs (micro mesh) that went from 600 grit to 1500++ with my ROS. I lubed with water and very light dish soap. The top coat looks really smooth as can be seen with a mirror like reflection but there is a slightly cloudy or milky hue. Is this because I used water on a water-based top coat? Will it gradually go away? Do I need to buff longer? I am really starting to get frustrated. I swear I've read every finish book at least 3 times and asked a million questions. Can anybody help? Thanks! :BangHead: