Hi Everyone,
Does anyone know where I can find 3/8 sheets of MDF? I am making kitchen cabinets. Doors will be 7/8 thick, rail and stile with a bead edge. I want the MDF panel to be flush with the back of the door, rabbeted to fit the groove in the rail and stile (using Whiteside 6003 bits). I made a sample with 1/2" MDF but once it was all lined up there is only a very slight (just more than 1/16) edge between the face of the door and the top of the bead. A 3/8 MDF center panel would allow be to move the panel a little deeper from the face of the door. I can't find anything at my usual go to suppliers - Hardwood store of NC and Capital city lumber. I am in Durham.
Does anyone know where I can find 3/8 sheets of MDF? I am making kitchen cabinets. Doors will be 7/8 thick, rail and stile with a bead edge. I want the MDF panel to be flush with the back of the door, rabbeted to fit the groove in the rail and stile (using Whiteside 6003 bits). I made a sample with 1/2" MDF but once it was all lined up there is only a very slight (just more than 1/16) edge between the face of the door and the top of the bead. A 3/8 MDF center panel would allow be to move the panel a little deeper from the face of the door. I can't find anything at my usual go to suppliers - Hardwood store of NC and Capital city lumber. I am in Durham.