tray

  1. Douglas Robinson

    Serving Tray: A different type of project for me

    I have wanted to try making a serving tray since I read a Woodsmith article a while back regarding using a bowl bit in your router. I bought a CMT collar extension recently and started on this project using a pice of Sapele I bought at East Wake Hardwood last year. I really enjoyed this...
  2. Douglas Robinson

    Magnetic Bandsaw Tray

    Rockler sells a magnetic bandsaw tray. So I made my own using 1/8 plywood I bought from sawduster and some rare earth magnetic I had left over from another project. I would have put the tray on the top, but the Delta bandsaw does not have a flat cover there. Doug
  3. Nativespec

    Carved Bowls and Serving Tray

  4. Walnut and ambrosia maple tray

    Walnut and ambrosia maple tray

    Walnut and ambrosia maple tray
    • PeteM
    • Media item
    • ambrosia and maple tray walnut
    • Comments: 0
    • Album: Boxes, etc.
  5. J

    Serving tray

    Thanks to gotojeremy for the inspiration to make the serving tray. I wanted to try my hand at edge glueing and using the hand scraper on the maple, purpleheart, and wenge deck.
  6. Tray

    Tray

    Maple, Purpleheart, and Wenge. 23" x 15"
    • Jim Hancock
    • Media item
    • maple purpleheart tray wenge
    • Comments: 0
    • Category: Member Galleries
  7. WoodWrangler

    This Evenings Project ... a Serving Tray

    Well, the weekend has been busy but I was able to squeeze in a couple hours Sunday afternoon to build a prototype serving tray. Since it appears to have been a success, I plan on making a set for my mother (yes, getting started in Christmas gifts for next year! :lol:) Just a dry fit so far ...
  8. jimwill48

    Serving Tray

    Here is a serving tray, I just made. It's really nothing special in the design or construction. Size wise it's 12"x 16" x 5/8", all long grain with finger cuts made with a router and a cove cutter and small metal ball feet. What makes this special is the wood. It's some of the nicest looking...
  9. Canuck

    Keyboard Tray Slides

    A person at my daughters HS has asked if I could put together two keyboard trays for the secretaries at their office. I probably have enough 3/4" ply to put together two, but I am at a bit of a loss as to where I can find the necessary "under mount slides".:-? I saw these at the Lee Valley site...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top