started

  1. blazeman45

    New Kitchen Cabinets Started (New Pics 01/09)

    The wife asked for new cabinets and counter tops for X-mas!! My first thought was new tools to help me along and she agreed!! :banana:I bought the new Dewalt 718 and finished getting my shop set up like I wanted it!! The cabinets are birch plywood with Cherry face frames. She wanted the look...
  2. E

    Turnings Since I started 6 months ago.

    I haven't posted here before so I thought it would be good to introduce myself with some of my work. I needed an incentive to clean my work bench off tonight and I thought it would be nice to see what I've done since I started with turning these things called art. So far, I've made about 45...
  3. blazeman45

    Mitre Saw Station Build (Updated Pics - 11/18)

    After much thought, I went to the shop this morning and got started building my new mitre saw station... I purchased a new Dewalt 12" SCMS a couple of months ago to replace my old 12" Dewalt. I got the carcasses and tops built today and got the table for the saw installed. - The saw table is...
  4. rcflyer23

    Started a Chessboard Today

    So I decided to start a Chessboard today. I got some cutoffs from The Hardwood store in Gibsonville during the Shop Crawl and dad had some walnut that he let me have. I started milling it today. So far I have the wood milled and ready to be glued up, Now I just need to be brave enough to glue...
  5. blazeman45

    New Router Table Started (Updated PICS)

    My old router table served me well for the last 10-12 years but I wanted a new one that allowed mobility. I decided this week to get it started... I built it from Birch plywood and Poplar (I'm frugal... Wife says cheap:gar-La;) View image in gallery I wanted bit trays I could take out...
  6. C

    Started Pen turning

    Well it was bound to happen I reckon. I have been wanting to start and decided this was as good of a time as any. I am still working on trying to get good finished. I am currently just using CA with micromesh and then a plastic polish. View image in gallery I built the stand and it...
  7. Phil S

    New shop started

    I have finally outgrown my current mechanics, wood and general storage shop. I will retain this current shop (520 sqft) for mechanics and wood storage. My new shop will be reserved for woodworking. Here are the specs: Size: 24 x 28 main room with 8 x 23 wing for 856 sqft Foundation: full...
  8. B

    Shop expansion started

    Finally getting started on the shop expansion this week, hope the weather holds. Long story but since I live in the Historic District my options were limited by the zoning authorities. Size kept being whittled down so I have ended up with a 16x20 addition to the existing 12x30 building. The same...
  9. Trent Mason

    Introductions thread started

    Just wanted to let you all know that I started a thread for the BOD candidates introductions and a pm has been sent to each of them to remind them to post their intros. I hope you all have had a great weekend. :thumbs_up:thumbs_up Trent
  10. JohnW

    New Shop Started - Floor Advice

    Haven't been around here much the past year because all tools are in storage. That's about the change. New shop should be move in ready in a few weeks. 20' x 28' single story, 9.5' eave, behind my house on a slope with crawl space. Right now it's under roof and wraped awaiting me to...
  11. red

    Wood Magazine Subscription Started

    I got my first issue of “Wood” magazine today with the special deal they ran back in January. I was late to the party and got it for $4.99 a year for four years but still a great deal. Just glancing through it and it seems like a very nice magazine. I like the trebuchet they show. Could be a fun...
  12. D

    Dupont6480 Workshop started!!

    Background: Started to modify my 2 stall barn (no footings or slab) into a workshop. Received a lot of great advice recommending otherwise as I would end up with severe moisture and building structure issues in the future. I was advised to consult inspectors, contractors, builders, termite...
  13. eyekode

    Started my workbench!

    Last weekend I started my workbench build. I hope posting my progress will help motivate me to finish :). I started out with ~110 bd ft of 8/4 white oak mostly QS. View image in gallery I milled each board keeping them as thick a I could. They are cross cut to 82". View image in gallery...
  14. Y

    Who or what started your WWing bug

    Who or what started your wood working bug, for me it was my my first daughter. We needed a crib for her. The cribs that I thought worthy of holding my child, was simply out of my price range. So off to sears we go. Skill saw and a square and a lot of sand paper and many hours of hard labor she...
  15. FredP

    I started another bed yesterday[done]

    Yesterday I roughly milled out all those big boards I got from Jeff Mills. I cut off the bark and cut out the checks and knots. They are now all rough cut boards that I can handle.:eusa_danc Then after lunch I started on a bed for the youngest grand daughter.:cool: The head and foot boards are...
    • FredP
    • Thread
    • added bed started yesterday yesterdaydone yesterdaypics
    • Replies: 26
    • Forum: General Woodworking
  16. timf67

    Paolini's Limbert Style Coffee Table Build - Updated

    I had the pleasure of attending Gregory Paolini's class on how to build his Limbert style coffee table featured on the cover of FWW in December. After picking up some lumber at Rick's Woodworking Source on Saturday, I was able to start in on my attempt at the table last night. Here is my first...
  17. T

    Very little dresser (PART 2)

    I have offically started construction! Scroll down to see the progress. I am looking for a good reason to build this dresser. I found it at a refinishers business about 12 years ago and fell in love with it. The guy said it had about 7 coats of paint on it and had no idea what he would...
    • toolferone
    • Thread
    • dresser part started thoughts
    • Replies: 15
    • Forum: General Woodworking
  18. MarkE

    New Shop Started

    Well, after several delays, the new shop build finally got started on Friday, June, 25th. Because the road behind our house is designated as a 'collector' road (collecting for what, I can't say), we could not build where we (LOML) wanted to. Johnston County has decided that they 'may' want to...
  19. S

    It started as one.....

    Last week the wife and I were at Lowes and she found a cedar planter she liked. There was no way I was going to pay $43 for this thing so I bought some cedar there. Next thing you know, she wants 3 more. My neighbor asked me to help him make some so we made 4, Now the in-laws want a couple...
  20. CarvedTones

    started whistles, but daughter had other plans...

    I am finally starting to catch on how to make these things... The top 2 are inspired by medieval artifacts. Still some fine tuning and finishing to be done, but they play scales (and songs in the right hands). The wide bore limits the range a bit (upper register is tough) but gives them...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top