progress

  1. davejones

    Workbench Progress Report

    Well, I'm about 95% done with the workbench. All that's left is to add a hardwood edging around the top. The base is made strips of 3/4" ply laminated together. The top is a layer of MDF on top of 3/4" ply. I'm very happy with the results. Most of the cuts were made with a circular saw and...
  2. LeftyTom

    Progress Report: Jewelry Armoire

    I am trying to post a few pics of my progress. My wife finally figured out what it is...:icon_scra. An online thanks to WalnutJerry, who put the tasty cedar in my mitts. I have yet to build the 6 drawers for the armoire, or make the ring rolls for one of the drawers. I have the mirror for...
  3. Gotcha6

    Progress Report

    I've made some progress the last few weeks a couple hours at a time at night. Here are some thumbnails. More pics are in my gallery. This is yesterday afternoon - West wall. This is this afternoon about an hour ago. Insulated & 1 coat of mud. This is what I'm shooting for around most of...
  4. WoodWrangler

    Walnut & Maple Queen Bed Progress

    My buddy at work wants a bed ... so we set off to make one out of walnut with maple panels. It's based on a Woodsmith plan a couple years back and if all goes well should be completed in a month or so (depends on how much shop time I actually get!) A happy customer ...
  5. meika123

    Cyclone pic. (in progress)

    I promised Barb (B4man) I'd post a picture of my cyclone progress, so here it is. It is painted Black as a base coat, will decide on a color later. Possibly Ivory-cause I like it. This photo shows the hole cut for the Neutral Vane which will be welded in later. Was going to mount the cyclone to...
  6. Glennbear

    shop progress 2-16-08

    With the structure pretty much complete the time has come to start moving in machines etc. from their various temporary homes. Yesterday I moved a pretty large site built shelving unit from the metal shed in the back yard to the shop using the available Troy-Bilt moving van/trailer. The next...
  7. J

    Corner Cupboard Progress

    I love to see a project come together and thus had a great day in the shop! The wood was 5/4 rough NC walnut. After quite a bit of handplaning, I had enough pieces for a glue up. Here is the bottom of the cabinet. It needs glue blocks, stacked feet, moulding, and two paneled doors.
  8. JackLeg

    Solar Kiln Progress

    Thought I'd post a couple pics of WIP on my solar kiln. So, here they are: Floor assembly & front wall End Walls Progress is slow, but steady. The floor is insulated to R-11, per VT's "plans." Their plans are pretty much just some sketches of the pieces needed to build a kiln, not...
  9. Glennbear

    shop progress 2-9-08

    :eek:One coat of Kilz and two coats of Glidden Ultra-Hide White eggshell finish and the shop is finally brighter than Carlsbad Caverns. Today was spent wiring all the outlets, 21 on the walls and 7 on the ceiling for lights, door opener, air cleaner, and drop cords. After about the 25th outlet...
  10. Glennbear

    Shop Progress

    Last night the final pieces of OSB were put on the walls and today shop contents was pushed into the center or stashed in the DC closet so the painting project could commence. Some masking paper and blue tape and ready to fire up the sprayer.
  11. Bigdog72

    A gloat and shop progress

    I finally got around to taking some pictures: This is shop before hand: Shop after some improvements: Unisaw (gloat): More gloats: http://i127.photobucket.com/albums/p127/bigdog72/JDS.jpg[/IMG] Flame away!!:saw::saw::saw::saw:
  12. Douglas Robinson

    Progress on ZCyclone Installation

    I got the new 220V line ran alone the outside shop wall. It would have been fast except for the firebreak in the wall. Had to take down part of the plywood sheathing. After that I attached the Cyclone to the wall. Still working on the angle of the unit relative to the wall. I have to get more...
  13. lottathought

    Gloat in Progress

    Had this pipe laying around thanks to Scott and Jimmy. :eusa_danc Could not let it sit there...and I figured that the best way to motivate me to finish the setup was to start it. Probably not going to have the funds to finish this dust collection system till the spring. I also am still...
  14. Eaglesc

    Work in progress

    Bloodwood base Bloodwood and holly"toothpicks" Saures dyed veneers This is a gift for a friend,Half done at this time.
  15. walnutjerry

    A Little More Progress

    Here is the latest progress pictures on dogwood jewelery boxes. Can't wait to get some finish on to see the grain pop!! Jerry I see I have a duplicate image but can't figure out how to delete it from the post yet.
  16. lottathought

    Gloat in progress

    I am sure that some remember me asking about router plate inserts. I also asked some questions to some of the members about building a router table. Well this is what I have been up to. I have the Ridgid TS3650. The OEM fence requires that that front and back be installed. I am also in a...
  17. Bryan S

    Changing Table begun. Some progress with pics

    My daughter's been wanting me to build her a changing table and with the grandbaby's due date 7 to 8 weeks away maybe I'd better get my behind in gear. Both my daughter and the CEO want it painted white so we're going with birch ply and trim out the face and top with poplar. First make a jig...
  18. M

    loomming progress

    just broght up from the shop so please forgive the dust. the is one coat of minwax antique finsh on it to prtect it rom finger prints while it was being made...several more to come. this is a replica made from memories of my grandmothers, and web searches. more photo's to come when the finish...
  19. PeteM

    This Weekends Progress +

    Well, it's going slow but it's getting there ! Got it together - now to take it apart for finishing (Waterlox Original) Also, my Grand Kids are coming to visit next weekend so I made these: They're just sealed with a coat of shellac. If time permits LOML will paint them. If not they'll be...
  20. SteveColes

    Changes in progress

    I will be making changes today, mostly with menus. Don't worry about things not quite being right, while I do this. When I need you all to feedback issues, I'll let you know.:eusa_danc

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top