comments

  1. Phil S

    comments in classified

    Is there a way to recover the comments made to a classified ad. I am giving away some lights and doors and posted the announcement in the classified ad forum. Some folks responded via comments and others sent a PM, I am trying to figure who asked for what when but the comments seemed to have...
  2. Joe Scharle

    Porter-Cable 895PK Comments?

    Anyone with any first hand experience with this kit? I've read the reviews.
  3. S

    comments deleted when ad updated?

    I just noticed that when I updated my ad in the Classifieds that the pre-existing comments got deleted. Is this a "feature" or a "bug"?
  4. ScottM

    Comments on the NC Woodturning Symposium

    Rob (McRabbet) and I attended the NC Woodturning Symposium in Greensboro this past weekend. The NCWW had an informational booth. All I can say is if you turn and missed it you missed a lot. They had a bunch of world case presenters doing create demo and training. There were super deals on...
  5. Tar Heel

    Comments on 3rd week post

    As can be determined by the amount of $625 donated thru the first 21 days of the drive, we are far from the goal and will, unless there is a tremendous increase in response during the next 10 days, fall far short of our goal. I know that, in the past, Steve was opposed to making a big "to do"...
  6. Douglas Robinson

    A couple of comments from the picnic

    I just wanted to say that it was great to see everyone at the picnic. I always regret that there isn't more time to talk with everyone. I wanted to say this while I was there, but forgot, I want to thank Sapwood, Gator, Tomferone, and of course Steve Coles, the exiting Board of Director...
  7. Monty

    New spammer - photopost comments

    I got a curious comment on an old photo, and it caught my attention. I noticed that the comment included a link to an Amazon store. It's not in the member's signature - it's in the body of the comment. I was curious how many of these comments had been posted... check it out: Recent photo...
  8. K

    Freud glue line rip blade comments & questions

    Wanted to try this blade for a couple of reasons. First, the panel I am gluing is fairly large (long) and I thought it would be easier to do on the TS. Second, I am taking chunks out, even with new blades in the jointer and taking only a fuzz off each pass. I would call my results mixed. Some...
  9. J

    Comments Please - KD QS American Sycamore Lumber

    One of our newer members Scott Smith and I have struck a deal that I think all of you will enjoy. I have access to logs at a good price and a sawmill to saw those logs. Scott has a kiln and is an experienced kiln operator, were 75 miles apart from each other. So we put our heads together earlier...
  10. mshel

    Has anyone tried this? Curious as to comments good or bad.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top