bushing

  1. B

    Bushing Dust on Pen

    Just getting back into turning and an old problem has come up again. When sanding a pen I keep getting bushing dust on the wood. Especially when working with light colored wood. I saw a post where somebody mentioned sealing the wood with CA glue but I seem to get the dust in the wood during the...
  2. Flute Maker

    Making a Bushing

    I make flutes and I bore mine. Sometimes I have wood that is a little smaller than I normally use. In my set up on the tailstock (all home made) I have a box that holds a 1 1/2" ID bearing...I usually use 1 1/2 stock turned round to fit the bearing....I hand feed a gundrill in through the...
  3. scsmith42

    Where can I find an adapter bushing for a Delta benchtop mortiser?

    I have a Delta 14-650 hollow chisel mortiser, and it takes the standard Delta 5/8" shank chisels, which limits it's capacity to 1/2". I've noticed that most of the standard mortisers from other companies utilize a 3/4" shank chisel, instead of Delta's 5/8" shank, and that there are a lot of...
  4. S

    1" to 5/8" bushing: Freud BL71MCE9

    .
  5. Browning Bushing

    Browning Bushing

    Browning B 2 Split Taper Bushing Drillspot.com: SKU - 160228 Split Taper Bushing, Cast Iron, 2 Inches Bore
    • froglips
    • Media item
    • bushing homemade lathe
    • Comments: 0
    • Album: Homemade Lathe - 2007
  6. Ken Massingale

    PC Guide Bushing

    I really need a .400" PC style guide bushing. I have a Craftsman dovetail jig that uses this oddball size along with a .500". It comes with dinky sheetmetal-like guides that screw to a Craftsman router base, or to an optional base for non Craftsman routers. Any ideas how/where to get a .400? TIA ken
  7. DavidF

    Bushing for dewalt router

    Does the DW618 router take the standard PC type guide bushings that go into a 1 3/16" hole?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top