bowl

  1. Artisan Pirate

    Star Shaped Bowl, Scroll Saw Project Video

    Hey Everyone! In this fun scroll saw project video, we make a beautiful Star Shaped Bowl, Completely on the scroll saw! This design comes from the Summer 2025 Issue 99 of Scroll Saw Woodworking & Crafts Magazine by Fox Chapel Publishing and it really shows off a scroll saws versatility for...
  2. Artisan Pirate

    Segmented Bowl Made On A Scroll Saw, No Lathe Required! (Video)

    Hey Everyone! In this fun scroll saw project video, we make a beautiful segmented Bowl completley on the scroll saw! No lathe is required here and it really shows off what a scroll saw is capable of. The design calls for 1/2 inch material and is a Steve Good design. For this bowl, I used Walnut...
  3. Artisan Pirate

    Tropical Seahorse Bowl, Scroll Saw Project Video

    Hey everyone! In this scroll saw project video we make a Tropical Decorative Seahorse Bowl! This Steve Good design is made from 1/4 inch material and lends itself to stack cutting for the mutiple, identical parts that you need to cut out. This bowl would be great for anyone for loves the beach...
  4. Artisan Pirate

    Decorative Bowl, Scroll Saw Project Video

    Hey Everyone! In this scroll saw project video I make a unique decorative bowl. This Steve Good design uses 1-4 inch material and I think it shows the versatility of the scroll saw! Not only can a scroll saw cut out 2 dimensional items, it can also make Beautiful 3D works of art! Hope you all...
  5. Sam Knight

    Pecan lidded bowl

    This was an Anniversary gift I made for the wife. She loved it. Spalted pecan with mating lid made from 1 piece.
  6. Pecan lidded bowl

    Pecan lidded bowl

    Christmas gift for my mom.
  7. Cedar end grain bowl

    Cedar end grain bowl

    This was an experiment. Cedar end grain bowl turned.
  8. Turned Pecan lidded bowl

    Turned Pecan lidded bowl

    Anniversary gift I turned for the wife.
  9. Ed Fasano

    Bowl Gouge Grinding Help

    I have a sense that I know what I’m doing wrong, but I’d be most grateful for some experienced guidance. My efforts to put a 50-degree bevel on a new bowl gouge have yielded what I’ll call a scalloped sweep, wherein the bevel is something other than uniform at the leading edge. It almost as if...
  10. Found Wood

    Found Wood

    Found Wood Bowl with Walnut Inserts
  11. Found Wood

    Found Wood

    Found Wood Bowl with Walnut Inserts
  12. D

    Re-purposed blown bowl

    I had a beautiful lump of Bocote (Central America, specific gravity over 1.0, so the wood does not float), and the coloration on it was simply amazing. It is very dense, oily wood, sort of like lignum vitae. It turned like butter! The outside was beautiful and it came off so clean with...
  13. D

    The Australian Burl bowl is finished!

    The wood is Corrugata Burl, from the Outback of Australia. I sanded to 3000 grit, and it has one coat of Lin-Speed finish on it. Very rock hard stuff. I had to sharpen my inside bowl scraper about every third pass. This piece started out as a 8X9X4" burl cap, white on the outside, brown on...
  14. First Bowl on the Black Beauty

    First Bowl on the Black Beauty

    starting to look like a bowl
  15. First Bowl on the Black Beauty

    First Bowl on the Black Beauty

    hmm... what to do about the crack?
  16. D

    Just a little square walnut bowl

    I turned and finished this little fella in about 4 hours yesterday. It was good therapy and cheaper than seeing a Shrink! The top is 4 3/8" square. Height is 2 1/8". Polished to 2000 grit. Finish is.....(wait for it.......) Walnut oil !
  17. D

    July 4 engagement bowl

    Instead of going to a recreational area and fighting with the crowds and traffic, I stayed home and turned a bowl. The lump came off the end of a huge slab of walnut I bought in April (to use for a coffee table). this was part of the scrap to square up the slab. The wood had been air...
  18. Wooden bowl by woodman2k

    Wooden bowl by woodman2k

  19. D

    Big maple burl bowl - FINISHED!

    I started turning the big maple burl piece. But first.....I got a little history on the piece of wood from the seller: "It is Western Big Leaf Maple. This tree was removed from a hillside in the Trask River Valley just east of Tillamook, Oregon. The Butt cut of the tree was 6 feet in...
  20. D

    Myrtle wood bowl

    I just turned the bowl this weekend. It is Myrtle Wood from Oregon. The diameter is 10 3/4". Coincidentally, the piece right behind it showed up in the mail today, and the circle in the middle is the same diameter (and thickness). The wood behind is a piece of Maple Burl and the burl...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top