Which Jaw For G3 Use?

[Flute Maker]

I turn flutes and start with a 1 1/2" square blank. Does anyone have a suggestion as to which jaw set for the Nova G3 would be the best for gripping this safely??. I can turn the ends round to fit but need them to grab more than the ones that came in the set that was on sale last yr.

 

[Gunslinger]

For turning the square stock...
I would think the 35mm spigot jaws should fit the bill nicely. http://www.teknatool.com/products/Chuck_Accessories/Spigot.htm
For Square Stock for the G3 and 35mm spigot jaws the adjustment would be .984 – 1.772
For Spigots for the G3 and 35mm spigot jaws it would be from 1.22 - 1.969

The spigot jaws will also hold much longer pieces unsupported by the tailstock than the bowl jaws will.

 

[Gunslinger]

Mike,
Here is a better link that shows all of the jaws and their travel.
http://www.teknatool.com/Downloads/jawtable.pdf