What are the chances this falls apart? Started this last weekend. I know this isn't the best joinery work, but, well, I just did it anyway.
Joints glued up and used brads to hold together till dry, then drilled 3/8" holes and added 2 dowels per joint.
Just curious what your thoughts are on how this will hold up as a base for a 1 seat bench.
Original plan was to use this piece of Walnut as the seat, but the base seemed oversized for the seat.
So I made a new one with my white oak stock and some thin strips of walnut glued up on the edges.
Joints glued up and used brads to hold together till dry, then drilled 3/8" holes and added 2 dowels per joint.
Just curious what your thoughts are on how this will hold up as a base for a 1 seat bench.
Original plan was to use this piece of Walnut as the seat, but the base seemed oversized for the seat.
So I made a new one with my white oak stock and some thin strips of walnut glued up on the edges.