MULTI SPEED HAS B EEN SOLD
This somewhat rare Delta attachment will increase the available speeds on your DP220 14” drill press from 4 to 12. I removed it from a 1942 vintage Delta 14” drill press. It will fit most machines with a 2-3/4” column. The machine it was removed from had the high speed spindle pulley – if you have the slow speed pulley you will need to get a different front belt than those included. All parts are present and accounted for and have been cleaned and, where appropriate, painted. No dings or breaks. The special 88106 bearing turns smoothly – replacements are available if necessary.
I am looking to get $225 shipped to lower 48 however everything is negotiable so feel free to make an offer. Feel free to ask for additional pictures.
Sorry for the confusion - I deleted the original phots and added one with the correct orientation of the column plug
Thanks for Looking
Rick
This somewhat rare Delta attachment will increase the available speeds on your DP220 14” drill press from 4 to 12. I removed it from a 1942 vintage Delta 14” drill press. It will fit most machines with a 2-3/4” column. The machine it was removed from had the high speed spindle pulley – if you have the slow speed pulley you will need to get a different front belt than those included. All parts are present and accounted for and have been cleaned and, where appropriate, painted. No dings or breaks. The special 88106 bearing turns smoothly – replacements are available if necessary.
I am looking to get $225 shipped to lower 48 however everything is negotiable so feel free to make an offer. Feel free to ask for additional pictures.
Sorry for the confusion - I deleted the original phots and added one with the correct orientation of the column plug
Thanks for Looking
Rick
Last edited: