This saw has treated me very well for more than a decade. Over the years I removed the steel extension wings and replaced them with a router table to the left of the blade and a larger extension wing on the right. The original fence was also replaced with a Delta T3 fence system which was a huge upgrade over the original factory fence. The saw will NOT come with either a blade or a router. The saw is 1.75HP, has a 4” dust port and is currently wired for 220 but I can switch it back to 110 if required. Saw is on a mobile base and can be raised, moved around and lowered very easily.
The saw comes with:
The saw comes with:
- Router table extension wing to the left of the blade – my shop is small so I integrated my free standing Rockler router table directly into the saw. Left of the blade means the router feeds in the same direction as the saw and allowed me to take advantage of my outfeed table.
- 2 Rockler router table inserts
- 1 Rockler router table fence with integrated dust collection and table/fence featherboards
- Right side extension wing – saw will cut just past 30” to the right
- 4 table inserts – 2 original for standard and dado and 2 leecraft phenolic inserts cut for zero clearance full kerf and thin kerf
- Delta T3 fence
- Incra miter gauge
- 1 Rockler TS crosscut sled (Rockler Tablesaw CrossCut Sled)
- All of the original equipment including the owners manual, riving knife, anti kickback pawls, bladeguard system, push stick, etc…