I put an Incra fence on my new saw so I don’t need the stock fence.
Includes rails, fence, filler board and all hardware.
Pick up in Reidsville Or Gibsonville.
Go to SawStop.com and you can see it on the 30” model. It is basically 2 pieces of angle iron with holes drilled at various intervals. If your saw has holes in the front and back, You should be able to make it fit.
well back in the shop first time today for a long time Compressor all hooked up in place and looked at tablesaw. THe fence will not attach a old cheap tradsmaen tablesaw all one piece. so I will hold on to until i can afford to get a different tables saw. Thanks fpr everything