I've been playing around with the new 4th axis on my CNC machine...this is the latest project "just to see if I could".
I started with a piece of walnut 2" square and 12" long...I used a 3/4" bowl bit to take the corners off to 2" diameter, then used a 1/16" diameter tapered ballnose bit to carve the detail...final outcome hopefully, will be a candle holder, by turning a new base and top to accept a candle on the lathe.
I started with a piece of walnut 2" square and 12" long...I used a 3/4" bowl bit to take the corners off to 2" diameter, then used a 1/16" diameter tapered ballnose bit to carve the detail...final outcome hopefully, will be a candle holder, by turning a new base and top to accept a candle on the lathe.