Jet JJP-10BTOS Won't turn on

Status
Not open for further replies.

manfre

New User
Manfre
My jointer/planer won't turn on. It sat unused for many months and was working the last time I used it. So far I've confirmed the safety tab is sitting properly. Any suggestions on what to check next?
 

Henry W

HenryW
Senior User
Check power to that circuit?
Any indication that it has power? Indicator lights somewhere?

Henry W
 

FlyingRon

Board of Directors, Webmaster
Ron
Staff member
Corporate Member
Check the reset button to the right of the switch. There's also a microswitch on the dust switch will inhibit operation if the chute is not seated.
 

manfre

New User
Manfre
Check power to that circuit?
Any indication that it has power? Indicator lights somewhere?

Henry W

No indication from the machine itself. I haven't started to open it up and check it with a meter.

Check the reset button to the right of the switch. There's also a microswitch on the dust switch will inhibit operation if the chute is not seated.

I checked the reset button on the front, but will check that the dust switch.
 

manfre

New User
Manfre
The microswitch for the dust chute was not being fully depressed. It's running again! Thanks Ron!
 
Status
Not open for further replies.

Our Sponsors

LATEST FOR SALE LISTINGS

Top