I have this ari cleaner in my shop. I upgraded mine to the remote control panel. This is a good air cleaner.
http://raleigh.craigslist.org/tls/2647650093.html
JDS Airtech 2000 Shop Air Cleaner - $125 (Hillsborough)
Date: 2011-10-21, 2:27PM EDT
Reply to: sale-wehaq-2647650093@craigslist.org [Errors when replying to ads?]
I have a professional shop air cleaning unit available in EXCELLENT condition with electrostatic, charcoal and extra large pleated fabric filters installed. This unit, Model 750E, has a variable speed fan motor (very quiet on the low setting) with pull chain ON/OFF and rotary speed selector control. This device is designed to reduce the airborn dust and particulate matter in your workshop. The manufacturer claims it will filter 99% of the air in a 30' x 30' x 8' shop area in only six minutes (10x air change per hour). Filtered air capacity is 750 cfm (unfiltered capacity is over 1,000 cfm). I have upgraded and replaced the filters so it is all ready for use [**Washable electrostatic prefilter cleans dust, bacteria, fungi, and pollen from the air. For the removal of odors, fumes and smoke an optional charcoal filter has been installed in this unit. A large surface area fabric prefilter is also installed]. The air cleaner measures 34" x 24" x 12" and is designed to be hung from a ceiling (has eye bolt rings on top for hanging) or placed up high in the room for maximum efficiency. Weighs around sixty pounds and cost about $350 when new. This unit is in excellent to like new condition PLUS has upgraded filters.
PostingID: 2647650093
http://raleigh.craigslist.org/tls/2647650093.html
JDS Airtech 2000 Shop Air Cleaner - $125 (Hillsborough)
Date: 2011-10-21, 2:27PM EDT
Reply to: sale-wehaq-2647650093@craigslist.org [Errors when replying to ads?]
I have a professional shop air cleaning unit available in EXCELLENT condition with electrostatic, charcoal and extra large pleated fabric filters installed. This unit, Model 750E, has a variable speed fan motor (very quiet on the low setting) with pull chain ON/OFF and rotary speed selector control. This device is designed to reduce the airborn dust and particulate matter in your workshop. The manufacturer claims it will filter 99% of the air in a 30' x 30' x 8' shop area in only six minutes (10x air change per hour). Filtered air capacity is 750 cfm (unfiltered capacity is over 1,000 cfm). I have upgraded and replaced the filters so it is all ready for use [**Washable electrostatic prefilter cleans dust, bacteria, fungi, and pollen from the air. For the removal of odors, fumes and smoke an optional charcoal filter has been installed in this unit. A large surface area fabric prefilter is also installed]. The air cleaner measures 34" x 24" x 12" and is designed to be hung from a ceiling (has eye bolt rings on top for hanging) or placed up high in the room for maximum efficiency. Weighs around sixty pounds and cost about $350 when new. This unit is in excellent to like new condition PLUS has upgraded filters.
- Location: Hillsborough
- it's NOT ok to contact this poster with services or other commercial interests
PostingID: 2647650093