INCRA MITER EXPRESS $110 (SOLD)

[frankc4113]

Incra Miter Express Cross Cut Sled. Includes hold down clamp, owner's manual and all pieces, some still in unopened packages. You can use any miter fence with it-easiest one to use is probably the one that came with your saw.
I set this up for use on a 3HP Sawstop Professional Series although it can be used on any saw.
Sled is in perfect condition. However, I just don't use it anymore.
If perhaps you are not familiar with the sled, I placed a link below to a video describing it

https://www.incrementaltools.com/INCRA_Miter_Express_p/miterexpress.htm

Retail cost was $180


Selling for $110 (SOLD)

 

[Kelly]

I don’t see the fence bar .

 

[frankc4113]

Kelly,
I think you are referring to the miter fence. You can use any miter fence you have with the sled. I also amended the original listing to indicate that the sled can be used with any miter gauge.
I also put that short video in the ad to more fully display the use of the sled.
Thanks

 

[Hmerkle]

@frankc4113 you do have to have a Incra Miter (like a 1000SE) to use the sled, right?

 

[frankc4113]

No, you can use any miter gauge with it. Of course when you see pictures of it, Incra has their miter gauge on it and I'm certain a lot of people are led to think you need an Incra miter gauge only.
Again, you can use any miterbgauge you have with it.