I'm selling this homemade machine which works excellent. I may have splurged on a multirouter from a fellow member.
-router not included - any router with a fixed base can be attached
-match fit clamps not included - you will need to buy some to use the dovetail top
-the machine still works amazing
-all the linear bearings are still performing well
-the cost basically covers the cost of the raw materials used and not my time to build it
description and pictures in my post a few years ago about making it:
ncwoodworker.net
-router not included - any router with a fixed base can be attached
-match fit clamps not included - you will need to buy some to use the dovetail top
-the machine still works amazing
-all the linear bearings are still performing well
-the cost basically covers the cost of the raw materials used and not my time to build it
description and pictures in my post a few years ago about making it:
homemade mortiser
this is a copy in some regards to a youtube video i saw by Phil Morley. the X Y table uses linear ball bearings and were an absolute pain to get square. they do contact the router face plate at the same time so its as square as i can get it. the router goes up and down on another set of linear...
