I was browsing the internet and stumbled across this.
Thought a few might be interested.
http://www.holbren.com/product.php?productid=3749&cat=0&page=1
From the site description...
We have 1,000 of these sets with minor issues which is why they are only $2.00. We measure the 15/32" at 61/128" and the 23/32" bit is marked incorrectly on the lable but measures proper. There are no other issues and the bits are equal in quality to our regular set. This set has a 61/128" and 23/32" straight bit for 1/2" and 3/4" undersized plywood.
Shank = 1/2" and 1/4"
C3 Carbide Thickness = .100"
Maximum RPM = 24,000
Router Table Required = No
Thought a few might be interested.
http://www.holbren.com/product.php?productid=3749&cat=0&page=1
From the site description...
We have 1,000 of these sets with minor issues which is why they are only $2.00. We measure the 15/32" at 61/128" and the 23/32" bit is marked incorrectly on the lable but measures proper. There are no other issues and the bits are equal in quality to our regular set. This set has a 61/128" and 23/32" straight bit for 1/2" and 3/4" undersized plywood.
Shank = 1/2" and 1/4"
C3 Carbide Thickness = .100"
Maximum RPM = 24,000
Router Table Required = No
