CPSC Drill Press Recall

Status
Not open for further replies.

Glennbear

Moderator
Glenn
I have never heard of this retailer or brand but just in case anyone owns one of these machines the CPSC has issued a recall:
Southern Technologies Recalls Drill Presses Due to Shock Hazard

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.
Name of Product: Powertec Drill Presses
Units: About 500
Manufacturer: Southern Technologies of Mundelein, Ill.
Hazard: Wires in the motor housing can be pinched, posing a risk of electrical shock to the consumer.
Incidents/Injuries: The firm has received one report of a consumer experiencing a minor electrical shock.
Description: The recall involves the Powertec 8” Drill Press with AC powered laser. The model number is DP800 and can be found on the product specification label located above the handle on the right side of the machine.
Sold exclusively at: Blain’s Farm and Fleet stores nationwide from November 2009 through February 2010 for about $80.
Manufactured in: China
Remedy: Consumers should immediately stop using the recalled product and return the item to the place of purchase for a full refund.
Consumer Contact: For additional information, contact Southern Technologies at (877) 393-7121 between 9 a.m. and 5 p.m. CT Monday through Friday or visit the firm's website at www.southerntechllc.com
10288.jpg


[SIZE=-1]---[/SIZE]​
[SIZE=-1]CPSC is still interested in receiving incident or injury reports that are either directly related to this product recall or involve a different hazard with the same product. Please tell us about it by visiting https://www.cpsc.gov/cgibin/incident.aspx
The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury
[/SIZE]
 

Ray Martin

New User
Ray
Glenn,

I can't say as I have heard of these guys either... but since folks know that I build with H4H, they assume that I know what tool is what ( :dontknow: ). It's good to see these things posted for both our own knowledge and because any of us could get questions from friends.

Thanks for posting
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top