I have had this unique work bench for a long time. I do not know who built it or the original use of the bench...I suspect it was a carver or luthier. The hardwood top is about 22 by 30 inches, the vise opens 4 + inches and has 16 inch wide jaws. The bottom is a fully functional barber chair base. It turns 360 degrees and goes up and down and locks in any position. The table top tilts to nearly any angle. I have used this for an outfeed table for my table saw and band saw since you can dial in any height desired...I am asking only $150. If you want this work bench you will need help loading since it is very heavy.
Location Burlington
Location Burlington