1/4" mortising bit

[kirkpj01]

Does anyone know where someone (me :gar-Bi) can buy just the auger part of a hollow chisel mortising set? I generally don't make 1/4" mortises for doors but available stock dictated that. Seems like the auger is rather fragile even though I took things slow and easy.

 

[jhreed]

http://cgi.ebay.com/DELTA-MORTISING...tem&pt=LH_DefaultDomain_0&hash=item3caa066bd8

This is the best I have found on e-bay $29.99 plus $7.00 shipping. This is for bit & chisel. I would not suggest mix & match. The two units work together. Hope this helps.
James

 

[woodArtz]

$18 and change at Woodworker's Supply :icon_thum

 

[ehpoole]

How about $13.50 for a 1/4" set at Woodcraft?

http://www.woodcraft.com/Product/2063523/1534/14-Chisel-and-Bit-Set.aspx

 

[kirkpj01]

Thanks all.... I started out with two of the less expensive sets ( chisel and auger). I cut about 7 1/2 mortises in QSRO before the first drill broke. I still have one set left to complete the project but since I have a perfectly good chisel with no drill I was looking to see if I could just replace the drill.