wagon
-
Wagon Vise Nicholson Bench
Evans Wood Screws 24" . Results in ability to clamp a 2X12 vertically in the vise when finished.- minnehahas
- Media item
- Comments: 0
- Category: Shop Photos
-
Wagon Vise Nicholson Bench
Evans Wood Screws 24" . Results in ability to clamp a 2X12 vertically in the vise when finished.- minnehahas
- Media item
- Comments: 0
- Category: Shop Photos
-
Wagon Vise Nicholson Bench
Evans Wood Screws 24" . Results in ability to clamp a 2X12 vertically in the vise when finished.- minnehahas
- Media item
- Comments: 0
- Category: Shop Photos
-
Wagon Vise Nicholson Bench
Evans Wood Screws 24" . Results in ability to clamp a 2X12 vertically in the vise when finished.- minnehahas
- Media item
- Comments: 0
- Category: Shop Photos
-
All Terrain Wagon
Turning mechanism up close. Works great.- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
Starting to come together, looking Mean- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
5/8" cold rolled steel bar drilled and mounted. Looking Mean~!- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
front curve belt sanded to match the sides. Slightly difficult- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
Axle's mounted and front axle turns smoothly- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
Sides mounted and front curve belt sanded to match the sides- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
How the front wheels will turn, not mounted yet.- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
The wood axle's not mounted yet- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
My son helping me design and work on it.- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
All Terrain Wagon
Put together with Tite-bond glue and kreg pocket holes screws.- MrAudio815
- Media item
- Comments: 0
- Album: Woodworking projects
-
Benchcrafted Roubo Workbench End View
Workbench made from Benchcrafted's plans with their hardware. The top is 4" thick and about 87" long. Most of the stock is 8/4 ash from Bannish-Rickard lumber in Bristol, TN. The gap stop is not shown in these photos. Finally, I have a real workbench!- aamak
- Media item
- Comments: 0
- Category: Member Galleries
-
Red Flyer Wagon Plans???
Hello NCWW's, It's been a while, sorry. I am planning on building my son a Wooden Wagon with off road wheels (from Harbor Freight). Anyone build one before or have any plans for this? I want it to look something like this, just not a metal wagon. I want it to be a wooden wagon, wooden...- MrAudio815
- Thread
- Replies: 13
- Forum: Where Can I Find, Buy or Sell?
-
K
Seek: shop to fab wagon parts
I'm looking for a shop or individual that can help fabricate parts for an antique wagon restoration.. Any leads would be most welcome. Mark in Kernersville NC- Kration44
- Thread
- Replies: 6
- Forum: Request For Custom Projects
-
U
Seek: shop to fab wagon parts
I have an antique wagon I am restoring and am looking for a shop or someone that could replicate parts that need to be replaced.. Any leads or help would be most welcome Mark in Kernersville yankneurop@aol.com- Unregistered
- Thread
- Replies: 2
- Forum: Request For Custom Projects
-
A Cannonball wagon
Wagon from the entourage in the 1957 motion picture "The Pride And The Passion. Left side view.- johnpipe108
- Media item
- Comments: 0
- Album: Cannonball Wagon
-
A Cannonball wagon
Wagon from the entourage in the 1957 motion picture The Pride And The Passion. Rear view of the wagon, as seen in the movie.- johnpipe108
- Media item
- Comments: 0
- Album: Cannonball Wagon
Our Sponsors
LATEST FOR SALE LISTINGS
-
-
Noden Adjust-a-Bench legs with 28" Casters set MSRP $755 before shipping Sell for 400 pickup only- Started by minnehahas
- Replies: 0
-
-
-
