Very Beautiful Nautical Scroll Saw Portrait Depicting A Lighthouse, Ship, And Ships Wheel
Kenny Hopkins design is cut from 1/4 inch material with a 1/4 inch backer board
Cut with number 5 ultra reverse tooth blades
.
...
Latest Amazing Project From My =AT0bLILQx-6kh7UxQLMbO5nrbGbxC8OjXmzaC4_rw6_VCcw18eBw-d0XGWkAro3KfVtcsD8N0SUr9Zehaa4zADKyfNNZpj-tPjfPqLud1OC2nVpPf7jDpD4RkUJMLCeL2lr3EzklJTFxbg5jmNlGvJB_0hstyQy2Bw3s4XYAH3T3QH1PEBCIivcgzPQneTpVk5VkD4atfAL1nw']@longer.global Ray5 20 Watt Laser Engraver
A Beautiful...
Tropical Whale Tail Art.
Cut from 3/4 inch pine with a 1/4 inch backer board.
With so many tight V cuts in this one I always start at the pilot hole and go down one side of the V and back the blade back to the pilot hole and follow the other side completing the cut. This ensures that the V is as...
The Iconic Movie Jaws Was Released 48 Years Ago Today!
The design is by me and is cut from 1/4 inch material and is an older video of mine if you wanna see it
https://youtu.be/L3mRbupvdZg
I also can now offer this pattern to everyone! My good buddy...
Dolphin Sculpture, Scroll Saw Art
Steve Good design uses 3/4 inch material for both the scroll work and backer board.
This is an older video of mine when I was hitting my groove and was finding out how I wanted the channel to flow. Here's the link if you wanna see it...