Hey, Everybody.
Still learning, but I thought I'd share a project. This is the second tongue drum/tone box I've built. Sides are 4/4 birdseye and top is Padauk, all joined with 1/2"x 1/2" rabbets and yellow glue. Half-inch birch is screwed onto the bottom to give access to tune tongues. I...
I've been in between projects lately so I decided to build this little box as an exercise in inlay and use up some scrap wood. The box is pauduk and the medalion is pauduk, ebony and poplar, and the banding is ebony. I used BLO as a finish and after it dries for a while I'll put a coat of wax on it.