amp

  1. IMG_14771

    IMG_14771

    Trimming completed door for proper fit.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  2. IMG_14712

    IMG_14712

    Gluing up flat panel door frames. Only one end is glued here. Other end will be glued after panel is inserted.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  3. IMG_14511

    IMG_14511

    Drawer stops.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  4. IMG_14476

    IMG_14476

    Drawer dividers and supports.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  5. IMG_14363

    IMG_14363

    Installing dividers between shelf and drawer sections.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  6. IMG_14253

    IMG_14253

    First dry fit of carcass.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  7. IMG_14163

    IMG_14163

    Tenoning rails for end assemblies.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  8. IMG_14111

    IMG_14111

    Glue up for top.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  9. IMG_1401

    IMG_1401

    Completed leg w/ groove for panel and shelf pin holes.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  10. IMG_13962

    IMG_13962

    Dovetail socket in top of leg/post.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: Entry Cabinet
  11. IMG_10955

    IMG_10955

    Assembled table w/o top.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  12. IMG_10943

    IMG_10943

    Drawer supports/guides in carcass.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  13. IMG_10922

    IMG_10922

    Continuous grain drawer front.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  14. IMG_10913

    IMG_10913

    Jig for cutting tapers at miter saw.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  15. IMG_10901

    IMG_10901

    Legs, tapered and lower mortise cut.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  16. IMG_10893

    IMG_10893

    Orienting legs for best face and marking for future reference.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  17. IMG_10871

    IMG_10871

    Cutting taper on legs.
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: End Table
  18. Narrow TV table

    Narrow TV table

    Test fit
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: TV Console Table
  19. Narrow TV table

    Narrow TV table

    Test fit
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: TV Console Table
  20. Narrow TV table

    Narrow TV table

    Tapering the legs
    • Bill Clemmons
    • Media item
    • Comments: 0
    • Album: TV Console Table

Our Sponsors

LATEST FOR SALE LISTINGS

Top