This bowl was made using a scroll saw to cut segments, glue, sand and finish them. The design is my own free-hand drawing on a piece of poplar. After cutting a segment, I used that to get the outline of the next segment. Sanding on this bowl was tricky and took a lot of time.
This bowl is made from Aspen using a scroll saw. The flare design required making a double cut at two different angles with the scroll saw. I used geometry to get the angle I wanted.
This is made from flat stock bubinga and wenge, glued and cut with a scroll saw. I design my own patterns. The main bowl is 12" in diamter and the salad bowls are 8" in diameter.