Here's the center of activities on Berini. I built this back in 2012 with help from my son and friend from Vermont helped me wire it.l used materials from a house that was knocked down in Durham. All of the pine was milled down for stick framing when the inspectors down town were unable to get the framing plan approved for less than 1800.00 dollars.
Like someone said in another thread, "I just can't throw away materials till I die" and here's the proof. No pictures of my Covid 19 boat project but you can find it in the Resources Section under Danmart77/
Front of desk and then the back is fitted with raised panel to cover the dust in back.
A door plate being repurposed as a patchbox on the Kentucky.
Nitric acid with iron filings in the mix, then you heat up the finish and it turns red/brown
sugar maple from New Hampshire. A logger friend put it aside when he opened it and saw the curl.
A piece of red maple from down around the lake Jordan area. Bought it from Charles Holland a sawyer down in that area.
All chairs made with maple from NH. Walnut base from Ricky Pope a Durham sawyer here in the club.
cherry and sugar maple curly top
Walnut crotch I cut on my 20' bandsawl.
Attachments
Last edited: