Looking for source for wrap around piano hinge

[JoeC724]

I’m building the hanging tool chest off the new yankee workshop plans and at the time they suggested using wrap around/double wrap piano hinges. Is there a source anyone has used for these?

I checked the usual suspects (rockler, LV, amazon, etc) and googled around but only came up with one place, which tbh is expensive and a little sketch looking.

Thanks,
Joe

 

[Pointfiveone.5]

Looks like Richelieu might be your go to.

Piano Hinges

Find the largest offer in Piano Hinges at Richelieu.com, the one stop shop for woodworking industry.

www.richelieu.com

 

[mkepke]

I see them at a bunch of places including Rockler and AMZN.

Maybe try searching for ‘offset piano hinge’?

This style right?

https://www.amazon.com/Wise-8WD12-Aluminum-Offset-Piano/dp/B0017QV7VW/ref=asc_df_B0017QV7VW/?tag=hyprod-20&linkCode=df0&hvadid=344108483498&hvpos=&hvnetw=g&hvrand=1954315718877808324&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9009681&hvtargid=pla-785335187647&psc=1&mcid=a1759e37e5483efebda068fb758fec49&tag=&ref=&adgrpid=69358346135&hvpone=&hvptwo=&hvadid=344108483498&hvpos=&hvnetw=g&hvrand=1954315718877808324&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9009681&hvtargid=pla-785335187647&gclid=Cj0KCQiA2eKtBhDcARIsAEGTG40J56VNC9hRG8M22Zhm8K1en-whxVBRuJgNZ1yj_wrkkN-9RPTuw0caArwpEALw_wcB

-Mark

 

[Wilsoncb]

McMaster Carr

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

These guy are fast and charge fair prices for shipping.

 

[junquecol]

I used to buy them from Rockler, about 15 years ago.

 

[Phil S]

I used a heavy duty geared hinge made for commercial doors. They are on my very heavy wall mounted tool chest. Work great but they are expensive - about $180 for a 96"

 

[JoeC724]

Thank you for the responses! Greatly appreciated. I had not found mcmaster or richelieu.
The plans recommend “wrap around”/double offset as the majority of the box and doors are plywood and attach at the edge going with the ply (vs fastening into face) which I’d think won’t hold the screws well.

Seems like the ones Mark turned up from amazon are the optimal choice.

Thanks again!