plane

  1. merrill77

    Veritas Scraping plane rocks!

    I'm a bit embarrassed to admit that I've had this plane for a few years any haven't used it a lot. Looking back, I thought that since planes are, in general, much more difficult to sharpen tune than card scrapers, I would need to master sharpening a card scraper before I could sharpen and use...
  2. B

    Lie-Nielsen #2 Bronze plane on CL

    Looks like a deal for someone in the triangle... Lie-Nielsen bronze bench plane - $100 (Carrboro) Date: 2011-06-16, 1:06PM EDT Reply to: sale-r6bxc-2444166558@craigslist.org [Errors when replying to ads?] No. 2 Bench Plane, bronze 7½" (19.1cm) long with a 1-5/8" (4.13cm) x .125" (3.17mm)...
  3. CDPeters

    Hand Plane score

    OK - so some of you know that my *other* hobby is Amateur Radio - so this morning I was at a ham radio picnic / swap fest. As I was browsing the tables of used gear for sale/trade/barter, I came across the hand planes you see below. I asked the older gentleman at the table how much he wanted...
  4. 0821

    0821

    • CDPeters
    • Media item
    • 5 605 bailey bedrock hand no plane stanley
    • Comments: 0
    • Album: Shop Photos
  5. 080

    080

    • CDPeters
    • Media item
    • 5 605 bailey bedrock hand no plane stanley
    • Comments: 0
    • Album: Shop Photos
  6. MarkE

    Wooden plane irons

    I have a couple of old wooden hand planes that I haven't used much. I took them out today to see what I could do with them. The irons in both were pretty dull, so I figured I'd give the Worksharp a workout. I was a little surprised when I took the irons out and saw how thick they are. Both of...
  7. K

    Wood bodied plane repair question

    I went to loosen the depth stop on the fillister plane and the screw just came out. A bunch of fine sawdust came out so I know the threads inside the plane are toast. What would be the best way to fix it? I was thinking about turning a dowel to the size of the hole and gluing and redrilling the...
  8. sash plane

    Toothing Plane Score....

    This week while on Vac. in Fla... I found a odd shape smother plane...turns out to be German type wood smother... well after looking at the blade setup... I though wow... it is pitted very bad on blade tip... then I pulled out blade and BAAAAAM... it had a toothing blade in it so bought it for...
  9. B

    Plane house

    I needed a fast project a couple of weekends back so found this plane birdhouse. This was a magazine project a few months back and is a fun quickie project. It makes me smile when I see it because it is so BIG. :gar-La; I changed the plan slightly on the second one to get the end grain off the...
  10. NCPete

    HF Filister/Rabbet Plane

    some ages ago, HF carried a nifty duplex rabbeting plane, and I scored one. I have somehow lost the fence for it, but find that it doesn't matter, at least for my use now - someday I may track down the spare parts on Grizzly. I pulled out this little HF gem today as I am installing a new...
  11. C

    Hand Plane Storage Cabinet Finished

    I completed a walnut cabinet to store some of my larger bench planes. Room for 2 each - No. 8, 7, 6, and 5. I also included storage in the doors for some AI chisels and mortise chisels and a few hand saws. I rough dimensioned with power jointer and planer but used hand tools for final...
  12. eyekode

    Plane hammer

    Last year I made my first Krenov style plane. I read David Finck's book which I highly recommend. In the book he describes how to make a plane adjusting hammer using 5/8" brass rod. After looking for a local source of 5/8 brass I found a 5/8 brass punch at harbor freight for ~6$ or so. I...
  13. Block Plane

    Block Plane

    Rare 1880's Stanley Rule & Level Co. Block Plane
    • Rusted
    • Media item
    • !02 1880's block plane stanley
    • Comments: 0
    • Category: Tools & Equipment Photos
  14. Block Plane

    Block Plane

    Rare 1880's Stanley Rule & Level Co. Block Plane
    • Rusted
    • Media item
    • !02 1880's block plane stanley
    • Comments: 0
    • Category: Tools & Equipment Photos
  15. willarda

    Molding Plane Workshop

    I am conducting a 3 day molding plane workshop at the Woodwright’s School, Pittsboro, NC, March 11-13 (Friday through Sunday). I have a good supply of European steamed quartersawn beech. We will make the bodies, then grind and hone the blades to fit. This is a completely handtool oriented...
  16. eyekode

    Wall hanging plane till

    Here is a simple plane till I threw together: The carcass is dovetailed. However I cut one end of one week and the other end another week. Can you guess what I did wrong? Yup, I made pins on one end of the boards and tails on the others :(. Turns out ok because the top doesn't carry any...
  17. 69CG9024

    69CG9024

    • eyekode
    • Media item
    • plane till
    • Comments: 0
    • Category: Shop Photos
  18. 69CG9023

    69CG9023

    • eyekode
    • Media item
    • plane till
    • Comments: 0
    • Category: Shop Photos
  19. W

    fair price to plane wood

    I have had a work/friend call me up and want me to plane a few thousand linear feet of pine from 1" down to 3/4". I didn't know what a fair price to charge to do this type of job. $.20 a lf sound alright?
  20. kooshball

    Shoulder plane

    Anyone tried the new Stanley 12-140 No. 92 Shoulder / Chisel Plane yet: http://www.stanleytools.com/default.asp?CATEGORY=PREMIUM+PLANES&TYPE=PRODUCT&PARTNUMBER=12-140&SDesc=No.+92+Shoulder+/+Chisel+Plane I am seeing it available for under $100 which sounds like a good alternative for the...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top