measure

  1. Glennbear

    Tape Measure?

    With the continuing torrential rains I have decided to build a large practical project .:wink_smil I do not have a plan per se but using an ancient and well revered text I have obtained dimensions. :wsmile: Unfortunately none of my tapes are marked in CUBITS .:wconfused: Does anyone know where I...
  2. Sharp Blade

    Measure Once, Cut Right Through...

    EVERYTHING! I am such a dolt. I had put the piece on top of my tablesaw in order to mark it and make the cut. I don't have my ususal limited space anymore, I now have much LESS!! Anyway, to cut :wink_smil...er...make a long story short...I forgot to move the board to a safer location, such as...
  3. Hook

    And for good measure

    The "Solitude" pattern from the Wooden Teddy Bear: I think it's time for some cherry/blueberry crisp, a glass of chilled late harvest wine and some shuteye. I think I'm finished for the weekend.
  4. Bryan S

    Measure twice cut once. I did, but.....

    Nowhere does the cliche say to make sure your panels don't move when routing dados. If so this is what you get asymmetric parrallel dadoes. :BangHead::BangHead::BangHead:. Fortunatley this is an area thet will be covered by a filler strip underneath and drawer slides above. I was able to...
  5. WoodWrangler

    Talking Tape Measure???

    From a friend of mine ... is there such a thing as a talking tape measure?? Begin quote ... My uncle has had a major vision impairment, so much so that he cannot see straight ahead. He has peripheral vision, and distance vision., and gets around pretty good, but he was quite the woodworker...
  6. Littlejon

    Measure NOT and Cut At LEAST Twice!

    Well, you know the old saying about measuring twice and cutting once? I seemed to have forgotten that this morning on a quickie project! I carry around motor oil, brake fluid, etc in the back on my Trooper and have always used an el-cheapo plastic container. Well, I have always said I needed...
  7. Table Saw Gauge

    Table Saw Gauge

    Read the gauge at the top using the frame as indicator.
    • Dullblade
    • Media item
    • gauge measure saw table
    • Comments: 0
    • Category: Member Galleries
  8. Table Saw Gauge

    Table Saw Gauge

    Or... Se gauge to depth desired for cut then raise blade to bottom of guage for proper cut.
    • Dullblade
    • Media item
    • gauge measure saw table
    • Comments: 0
    • Category: Member Galleries
  9. Table Saw Guage

    Table Saw Guage

    Push gauge down on blade to measure current depth.
    • Dullblade
    • Media item
    • gauge measure saw table
    • Comments: 0
    • Category: Member Galleries
  10. Table Saw Gauge

    Table Saw Gauge

    • Dullblade
    • Media item
    • gauge measure saw table
    • Comments: 0
    • Category: Member Galleries
  11. Table Saw Gauge

    Table Saw Gauge

    Home made saw depth gauge
    • Dullblade
    • Media item
    • guage measure saw table
    • Comments: 0
    • Category: Member Galleries

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top