endgrain
-
Cutting Boards
Just some end grain cutting boards ordered for Christmas 2013. Purpleheart & Maple.- CLetts
- Media item
- board cutting endgrain
- Comments: 0
- Category: Member Galleries
-
Planning An End-Grain Box
as a birthday gift for my wife. I want it to have a finial and a foot. The loose plan is to turn the stock for the box round, cut tenons on each end, then cut the tenon/part the lid off all between centers. Next I would hollow the top and bottom in the chuck and do final sanding and finish...- crokett
- Thread
- box endgrain planning
- Replies: 1
- Forum: Woodturning
-
End grain Spalted Pecan Box
About 1.5" x 2.25" Turned end grain, AO and buffed. Yes the lid does have that "Pop" This was a small cut off from the bowl I turned for the Museum for Scott S.- NCTurner
- Thread
- box end endgrain grain pecan spalted
- Replies: 15
- Forum: Woodturning
-
Turning end-grain in green wood
I need some advice on turning green wood end-grain. I have seen some who say you can leave the pith in as long as you turn it thin enough to dry without cracking, AND if you are willing to live with the anticipated distortion drying will bring. So if I were to try a hollow form end-grain in, say...- llucas
- Thread
- endgrain green turning wood
- Replies: 5
- Forum: Woodturning
