I am ready to cut the tenons for my trestle legs. If you remember I made these legs a short time ago. My cut wasn't exact when I finished and prepared it for glue up so I hope someone can help me learn a better technique this time. I used the dado blades in my tablesaw, the fence on the right and the crosscut guide to push the work through the blades. If I put my guide to the far left and make the first cut then I only have to move the wood to continue to clean up the excess. That first cut is the most important however there are four of those cuts. How can I assure myself of making sure they are all in the same position? Here is where the true woodworking comes into play. Help
Lorraine
Lorraine